PUBLICATIONS
Assessment of the Social and Environmental Impacts of Keffi-Lafia Federal Highway.
Journal: International Journal of Physical Science. , 2011
Author: Onosemuode, C and Akwa, L
Phase-based neuron training using evolutionary algorithms.
Journal: Fundamentals of Electrical Engineering (ISFEE), 2014 International Symposium, 2014
Author: Sorin Laureniu Stnescu Omonigho Benedict Otanocha
DEVELOPMENT OF WATER HYACINTH BRIQUETTING MACHINE
Journal: International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), 2016
Author: Okwu O. Modestus Adeyemi I. Olabisi ThankGod E. Boye Ezurike O. Benjamin
Assessment of the Impacts of Refinery Effluent on the Physico-chemical Properties of Ubeji Creek, De ...
Journal: Journal of Environmental Analytical Toxicology , 2017
Author: Eunice OE, Frank O, Voke U, Godwin A
Performance Evaluation of Multicast Protocols
Journal: SAU Science-Tech Journal, 2017
Author: Akpojaro, J., Omogbhemhe, M., Oyemade, D. A.
The Effect of Billet Location on Completely Closed Cavity Die Forging
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Determination of Optimum Welding Flux Composition Using the Bend Strength Test Technique
Journal: Advanced Materials Research , 1994
Author: Joseph I. Achebo, A.O. Akii Ibhadod
Measurements and Evaluation of Anthropometric Data of Nigerian Adult Paraplegics for Wheelchair Desi ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences (JETEAS) , 2013
Author: Ashiedu, F. I. and Igboanugo A. C.
Risering of a Four-Cavity Die Production Mould by Convectional Method
Journal: Advanced Materials Research, 1994
Author: Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata
Use of inequalities in the determination of control systems compensation parameters
Journal: Advances in Modeling Analysis C. AMSE Press, 1993
Author: IBHADODE, A.O.A
Analysis of Coconut Ethyl Esther (Biodiesel) and Fossil Diesel Blending Properties and Corrosion Cha ...
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: Samuel O. D., Ashiedu F. I. and Oreko B. U.
The Use of Geoinformatics Techniques in Site Selection for solid Waste Dump A Case Study of Warri an ...
Journal: International Journal of Science and Research (IJSR), 2017
Author: Christopher Onosemuode and Omorogbe Osemwegie
Predicting Reservoir Behavior using Mathematical Models 2 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
Dynamics of Land use Change: A Case Study of Lafia, Nasarawa State, Nigeria
Journal: Geoinformatics Geostatistics: An Overview, 2017
Author: Onosemuode Christopher and Galadima Daniel Habila
Remedation of Crude Oil-Polluted Surface Water Using Aqua-gel Bentonite, Periwinkle Shell Chitosin E ...
Journal: Journal of Ecology and Environment, 2016
Author: Okafor, W.C., Menkiti, M., Okafor, I., Ohimor, E., Onocha, O., Oreko, B., and Sheidu, S.
Sequestering of Fe and Pb ions from Wastewater by Canarium schweinfurthii after carbonization and ch ...
Journal: Journal of Applied Science and Environmental Management, 2016
Author: Bassey Uwem, Oghenekohwiroro Edjere and Solomon Ebiye Otolo
Cloud Computing Model for Virtual Libraries Implementation in Nigerian Tertiary Institutions
Journal: International Journal of Open Information Technologies, 2017
Author: Abdulwaheed YusufIse Anderson OroborAtanda Sambo
Computer Aided Structural Analysis of Axle Tilting Effect on Tractor Front Axle Support.
Journal: Innovative Systems Design and Engineering,, 2014
Author: Aduloju, S.C., Mgbemena, C.O., Ebhota,W.S., Bolarinwa, G.O.
Engineering Design Criteria for Wheelchair: AHP approach
Journal: Journal of Sustainable Technology (JoST), 2015
Author: Nwaoha T. C. and Ashiedu F. I.
Effects of Turning Parameters on Metal Removal and Tool Wear Rates for Low Carbon Steel
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: Mgbemena C.O Mgbemena C.E, Etebenumeh G, and Ashiedu F. I.
Development of a New Flux for Aluminium Gas Welding
Journal: : Advanced Materials Research, 1994
Author: oseph I. Achebo, A.O. Akii Ibhadode
Diamond Bit Selection for Horizontal Wells
Journal: journal of Engineering Research and Sustainable Development, 2009
Author: Akpoturi Peters and Onwuachi- Iheagwara P .N
Development of a New Flux for Aluminium Gas Welding
Journal: Advanced Materials Research, 1994
Author: Joseph I. Achebo, A.O. Akii Ibhadode
Determination of the optimum mix of sawdust and coal dust as a fue
Journal: Technical Transactions of the Nigerian Institution of Production Engineers,, 2000
Author: OSARENMWINDA, J.O. and IBHADODE, A.O.A.
Towards an Enhanced Product Line Engineering Process Model
Journal: Benin Journal of Advances in Computer Science, 2019
Author: Oyemade, D. A, Onibere, E. A.
Advances in materials and systems technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Synthesis, crystal structure, electrochemical and anti-corrosion studies of Schiff base derived from ...
Journal: Molecular structure, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe, Henry U. Nwankwo, Eric C. Hosten
Adjustment to Oil Saturation Estimate Due to Various Reservoir Drive Mechanisms
Journal: International Journal of Advanced Petroleum Engineering and Technology, 2014
Author: Okotie Sylvester and Ikporo Bibobra
Characterization and Creep Behaviour of Polypropylene/Calcium Carbonate Nanocomposites.
Journal: Journal of Applied Sciences Research, , 2010
Author: Mgbemena, C.O., Mgbemena, C.E., Ubani, N.O.
Towards a Software Cost Reduction Model
Journal: Benin Journal of Advances in Computer Science, 2018
Author: Oyemade, D. A, Onibere, E. A.
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: Australian Journal of Engineering Research. , 2015
Author: C.O Izelu, Eze S.C, Oreko B.U and Edward, B.A
A Factorial Study of Accessibility Requirements of Paraplegics in a Built-up Environment
Journal: Journal of Innovative Research in Engineering and Science (JOIRES), 2011
Author: Ashiedu, F. And Igboanugo A. C.
Improved Transmission Equation for Terrestrial FSO Link
Journal: International Journal of Electrical and Electronics Research , 2016
Author: Oluwole J. Famoriji, Kazeem B. Adedeji, and Oludare Y. Ogundepo
Design of a PV-Connected DC-DC Converter
Journal: International Journal of Emerging Trends in Engineering and Development, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
Creep function Parameter Analysis for Optimum Design with Calcium Carbonate Carbonate Nanofiller Pol ...
Journal: Journal of Minerals and Materials Characterization and Engineering , 2011
Author: Ihueze, C.C., Mgbemena, C.O., Nnuka, E.E.
Development of an Electric induction furnace for heat treatment of ferrous and non-ferrous alloys,
Journal: American Journal of Engineering Research,, 2015
Author: Anaidhuno, U.P Mgbemena, C.O
Delineating the Proper Shooting Medium for Seismic Reflection Survey in the Greater Ughelli Depobelt ...
Journal: Geophysics Remote Sensing, 2014
Author: Alaminiokuma, G. I. and Emudianughe, J. E.
Corrosion Rates and its Impact on Mild Steel in Some Selected Environments.
Journal: Journal of Scientific and Engineering Research., 2016
Author: Umeozokwere, A. O., Mbabuike I.U., Oreko B.U, and Ezemuo, D.T.
Adsorption and desorption performances of Eichhornia crassipes (water hyacinth) roots and leaves pow ...
Journal: Ovidius University Annals of Chemistry, 2025
Author: Tesi, G.O., Ejeromedoghene, O., Alli, Y.A., Okunoja, H.B. and Ipeaiyeda, A.R.
EXPERIMENTAL DETERMINATION OF THE EFFECT OF NOTCH SHAPE ON WEIR FLOW CHARACTERISTICS USING CONSTANT ...
Journal: Asian Journal of Current Research (AJOCR), 2017
Author: ADEYEMI I. OLABISI, ABAM TAMUNOPEKERE JOSHUA AND OREKO U. BENJAMIN
Improved Correlation for Predicting Stock Tank Gas-Oil Ratio in Niger Delta
Journal: Onepetrol Journal, 2016
Author: Hilary Okeke. and Okotie Sylvester
Development of a Manual Metal Arc Welding Flux from Local Raw Materials in Nigeria
Journal: Applied Mechanics and Materials, 2004
Author: Oyawale Festus Adekunle, Odior Andrew Oyakhobo, Ibhadode Akii
Evaluation of heavy metal pollutant from soils at Municipal Waste Dump in parts of Lagos metropolis ...
Journal: Nig. Jour. Applied Science, 2009
Author: Imeokparia, E.G. Onyeobi, T.U.S and Nwanchi Des. A.E.
Citizens Adoption of SMS Based E-Government Services in Lagos State, Nigeria, Journal of Emerging Tr ...
Journal: Journal of Emerging Trends in Computing and Information Sciences, 2012
Author: Chete, F. O., Oyemade, D., Abere, R., Chiemeke, S. C., Ima-Omasogie, I.
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
Crude oil degradation potential of bacteria isolated from oil-polluted soil and animal wastes in soi ...
Journal: AIMS Environmental Science Journal, 2017
Author: Voke O. Urhibo and Bernard O.Ejechi
Delineation of Soil Corrosivity Regimes Along Petroleum Pipeline Routes in the Geomorphic Zones of t ...
Journal: Petroleum Technology Development Journal, 2016
Author: Alaminiokuma, G. I., Osokpor, J., Emudianughe, J. E. and Warmate, T.
Work Flow for Reservoir Study and Challenges
Journal: Onepetrol Journal, 2015
Author: Okotie Sylvester. and Stanley Buduka. and Ikporo Bibobra
Analysis of soot in Rain waters around Warri Metropolis.
Journal: International Journal of Scientific Development and Research - IJSDR, 2020
Author: Okorhi-Damisa B.F, Ogunkeyede A.O, Akpejuluh P. and Okechukwu L. (
The Effect of Teaching Methods on Achievement of Senior Secondary Class One Students in Physics.
Journal: International Journal of Advances in Science and Technology,, 2011
Author: Achufusi, N.N., Mgbemena, C.O., Mgbemena, C.E., Nwoye, A.