PUBLICATIONS
The Effect of Calcium Carbonate at Low Volume Fractions On the Mechanical Properties of Polypropylen ...
Journal: Journal of Engineering and Applied Sciences, , 2010
Author: Mgbemena, C.O., Ubani, N.O., Mgbemena, C.E.
Determination of Thermal Properties of Rock Samples Using Modified Thermal Block Method
Journal: Open access e-Journal, 2012
Author: Olukayode D. Akinyemi, Yemi S. Onifade, Biodun S. Badmus and O.S. Awokola
Optimization of Nigerian Restaurant Waste Cooking Biodiesel Reaction Parameters using Response Surfa ...
Journal: International Journal of Energy Optimization and Engineering, 2014
Author: Waheed, M.A., Samuel, O.D., Bolaji, B.O. and Dairo, O.U.
Study on the Corrosive Nature of Soil PhysicoChemical Characteristics Toward Pipelines in Oil Produc ...
Journal: Asian Soil Research Journal, 2022
Author: Eunice Asiboroko Odesiri-Eruteyan a, Okorhi Folawe Beatrice and Ogwuche Christiana Ene
Experimental Study of Induced Vibration and Work Surface Roughness in the Turning of 41Cr4 Alloy S ...
Journal: IJIRSET , 2013
Author: Eze S.C., Izelu, C.O., Oreko B.U., Edward B.A
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
Gas Lift a tool to Production Optimization
Journal: International Journal of Oil, Gas and Coal Engineering, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
A Study of Land use Change in Warri, Delta State.
Journal: The Built Environment Journal, 2006
Author: Onosemuode, C. Ufuah, M.E. and Ifatimehin, O.O.
Geostatistical Analysis of well Velocity Data for Enhanced Depth Imaging in the Niger Delta
Journal: Journal of Applied Geology and Geophysics, 2017
Author: G. I. Alaminiokuma and W. N. Ofuyah
Assessment of the activities of scavengers and their economic impacts in waste recovery in Warri met ...
Journal: International Research Journal of Public and Environmental Health, 2017
Author: Asibor Godwin, Edjere Oghenekohwiroro
A Basic Approach To Designing Embedded Systems Using a Simple Calculator and C Programming Language
Journal: Nigerian Journal of Technology, 2014
Author: F. Tanshi, N. Bello
ONLINE MONITORING OF SOFT SENSOR PERFORMANCE: A CASE STUDY OF CEMENT CLINKER QUALITY PARAMETERS SOFT ...
Journal: IJRET: International Journal of Research in Engineering and Technology, 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Markov Chain Analysis for Inbreeding and their Genetic Effects.
Journal: International Journal of Numerical Mathematics., 2009
Author: Olaruwanju S.O, Onosemuode C. and Zubair M.A
Technology transfer and continuing engineering education
Journal: BeninJournal of Educational Studies, 1999
Author: IBHADODE, A.O.A
Utilization of cellulosic cassava waste for bio-ethanol production
Journal: JECE, 2015
Author: Elias E.Elemike, Ojiefoh C.Oseghale, Anthony C.Okoye
Methods, effect and challenges of Library instruction in academic libraries.
Journal: Library Philosophy and Practice., 2017
Author: Saturday U. Omeluzor, Alarape Asimi Akibu, Sunday Ikhimeakhu Dika and Clement C. Ukangwa
A Simple Procedure for Calculating shut -in Tubing Pressure (SITP)
Journal: Journal of Engineering and Applied Scientific Research, 2014
Author: Akpoturi Peters
Measure of Investment Optimal Strategy
Journal: Journal of Mathematical Finance, 2016
Author: J. T. Eghwerido, E. Ekuma-Okereke, E. Efe-Eyefia, Edwin Iguodala, T. O. Obilade
COMPARATIVE EVALUATION OF ARTIFICIAL LIFT METHODS ON A NIGER DELTA FIELD
Journal: Academic Research International , 2016
Author: Okologume Chinedu Wilfred, Ofesi Samuel F
geochemical and isotopic evidence for crystal melt fluid phase equilibra and late stage fluid rock ...
Journal: African Journal of Science and technology, , 1992
Author: Imeokparia, E.G.
Advances in materials and systems technologies II
Journal: Advanced materials research, , 2009
Author: A O Ibhadode I A Igbafe B U Anyata
Hydrocarbon Biodegradation and Antibiotic Sensitivity of Microorganisms isolated from an oil pollute ...
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2020
Author: Ataikiru T.L, Okorhi F.B and Onyegbunwa A.E
Design of a Photovoltaic Grid-Connected DC-AC Inverter
Journal: International Journal of Emerging trends in Engineering and Development, 2012
Author: (6) Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Manufacture of hand hacksaw blades form locally available mild stee
Journal: The Nigerian Engineer, 1991
Author: IBHADODE, A.O.A. and OJEAH, C.C
Using EF, PLI AND IGEO for the assessment of heavy metal pollution and sediment quality of Asejire R ...
Journal: International Journal of Environment and Pollution Research, 2015
Author: Asibor, I. G., Edjere, O., Adeniyi, F. and Ogundele, O.
A Demonstration of Box Jenkins forecasting typology
Journal: The Nigerian Journal of Engineering Management, 2003
Author: IGBOANUGO, A.C., IBHADODE, A.O.A., and ODIGIE, F
Development of an Electric induction furnace for heat treatment of ferrous and non-ferrous alloys,
Journal: American Journal of Engineering Research,, 2015
Author: Anaidhuno, U.P Mgbemena, C.O
Enabling a Viable Technique for the Optimization of LNG Carrier Cargo Operations
Journal: Journal of Marine Science and Application, 2016
Author: Onakoya Rasheed Alaba T. C. Nwaoha and M. O. Okwu
Towards a Software Cost Reduction Model
Journal: Benin Journal of Advances in Computer Science, 2018
Author: Oyemade, D. A, Onibere, E. A.
Performance evaluation of a prototype two component cutting force lathe dynamometer
Journal: journal and technology research, 2016
Author: A.O.Akii Ibhadode
The viability of compressed natural gas (CNG) as an alternative automobile fuel in Nigeria
Journal: Journal of Social Management Sciences, 1997
Author: AKELE, S.M.G. and IBHADODE, A.O.A.
Trace Determination of Phthalates in ground water Sample by GC-MS using specific sample concentratio ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2016
Author: Edjere, O., Pollard, P., and Maier, U.
An assessment of the usage of project evaluation techniques in some selected Nigerian industries
Journal: Journal of Social Management Sciences , 1998
Author: UMEMEZIA, F.O. and IBHADODE, A.O.A
Engineering Design Criteria for Wheelchair: AHP approach
Journal: Journal of Sustainable Technology (JoST), 2015
Author: Nwaoha T. C. and Ashiedu F. I.
Determining Temperature Extreme in Warri City, Niger-Delta Region, Nigeria
Journal: 9(3): 160-166, 2019 Article no.IJECC.2019.013 ISSN: 2581-8627, 2019
Author: Y. S. Onifade1 and V. B. Olaseni1
Deformation of solid cylindrical forgings in a completely closed cavity die
Journal: Nigerian Society of Engineers Technical Transactions, 1993
Author: IBHADODE, A.O.A. and DEAN, T.A
The geochemistry and depositional characteristics of Maastrichtan shales from southwest Nigeria.
Journal: Jour. of Min. Geology, , 2007
Author: Imeokparia, E.G., and Onyeobi, T.U.S
Optimal Reliability and Cost of Power Distribution: A case of Power Holding Company of Nigeria.
Journal: International Journal of Engineering Science and Technology, , 2011
Author: Chinwuko, E.C., Nwuba, E.I.U., Mgbemena, C.O.
Thermal behavior and UV properties of Organomodified kaolin oleochemically derived from Rubber Seed ...
Journal: Journal of Surface Engineered Materials and Advanced Technology,, 2013
Author: Mgbemena, C.O., Ibekwe, N.O., Mohamed, A.P., Menon, A.R.R. Sukumar, R.
UNSTEADY MHD MIXED CONVECTION FLOW PAST AN OSCILLATING PLATE WITH HEAT SOURCE/SINK
Journal: Journal of Naval Architecture and Marine Engineering, 2014
Author: A. M. Okedoye
Determination of the optimum mix of sawdust and coal dust as a fue
Journal: Technical Transactions of the Nigerian Institution of Production Engineers,, 2000
Author: OSARENMWINDA, J.O. and IBHADODE, A.O.A.
Design and Manufacture of Manual Electrode Coating Machine for Small Scale Manufacture
Journal: Nigerian Journal of Engineering Research and Development, 2004
Author: Oyawale F. A. and Ibhadode A. O. A
A combined algorithm approach to fuel consumption rate analysis and prediction of sea-worthy diesel ...
Journal: Journal of Engineering for the Maritime Environment, 2016
Author: Thaddeus C Nwaoha Garrick Ombor and Modestus O Okwu
Spatio-Dynamics of Surface Water Characteristics in Delta State.
Journal: International Journal of Advanced Remote Sensing and GIS, , 2015
Author: Onosemuode Christopher
On a Method for Die Container Design in Completely Closed Die Forging
Journal: TRANSACTIONS- AMERICAN SOCIETY OF MECHANICAL ENGINEERS JOURNAL OF MECHANICAL DESIGN, 1997
Author: Ibhadode, A. O. A.
Compositional, Geotechnical and Industrial Characteristics of Some Clay Bodies in Southern Nigeria
Journal: Jour. of Geography and Geology, 2013
Author: Onyeobi T.U.S Imeokparia, E.G. Ilegieuno O.A and Egbuniwe I.G
A comparative study of artificial neural network (ANN) and adaptive neuro-fuzzy inference system (AN ...
Journal: International Journal of Engineering Business Management, 2018
Author: Modestus Okwu, Olufemi Adetunji
The Effect of Billet Location on Completely Closed Cavity Die Forging
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Some physical and mechanical properties of asbestosfree experimental brake pad
Journal: JOURNAL OF RAW MATERIALS RESEARCH , 2006
Author: I M. Dagwa, A. O. A. Ibhadode
Reservoir Management Practice, Key to Optimum recovery
Journal: Multi- Disciplinary Engineering journal of Research Development, 2008
Author: Akpoturi P.E and Otitigbe F