PUBLICATIONS
Cadastral Mapping using GIS Techniques in Urban Development
Journal: The Nigeria Academic Forum, 2006
Author: Onosemuode, Christopher
Software for Reservoir Performance Prediction
Journal: Onepetrol Journal, 2015
Author: Okotie, Sylvester. and Onyekonwu Mike
Bioethanol production from corn stover using Saccharomyces cerevisiae
Journal: International Journal of Scientific Engineering Research, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben and Nsidibe-Obong Ekpe Moses
Evaluation of heavy metal pollutant from soils at Municipal Waste Dump in parts of Lagos metropolis ...
Journal: Nig. Jour. Applied Science, 2009
Author: Imeokparia, E.G. Onyeobi, T.U.S and Nwanchi Des. A.E.
Introduction to Manufacturing Technology
Journal: Open Journal of Energy Efficiency, 2013
Author: Mala Abba-Aji, Vincent Ogwagwu, Bukar Umar Musa, Prof. A.O. Akii Ibhadode (Contributor)
Using factor Cluster analysis and enrichment methods to evaluate impact of cement production on str ...
Journal: Advances in Applied Science Research, 2011
Author: Ameh, E.G., Kolawole, M.S. and Imeokparia, E.G.
Evaluation of the Levels of Phthalate Ester Plasticizers in Surface Water of Ethiope River System, N ...
Journal: Journal of Applied Sciences and Environmental Management, 2016
Author: Edjere, O., Asibor, I.G. and Otolo, S.E.
Application of re-refined used lubricating oil as base oil for the formulation of oil based drilling ...
Journal: Journal of Petroleum Technology and Alternative Fuels, 2013
Author: Oghenejoboh K. M., Ohimor E. O. and Olayebi O.
A new approach for the design of feedback control systems by the Bode Method
Journal: ournal of Electrical a nd Electronic Engineering ,, 1999
Author: IBHADODE, A.O.A.
Small and Meduim Scale Enterprises- Catalyst for National Development in Nigeria
Journal: Journal of Scientific and Industrial Studies, 2007
Author: Akpoturi P.E
The influence of Creep on the Mechanical properties of Calcium Carbonate Nanofiller Reinforced Polyp ...
Journal: Journal of Minerals and Materials Characterization and Engineering. , 2011
Author: Ihueze, C.C., Mgbemena, C.O., Ugwu, S.
Predicting Diffusion Dynamics Of The Coronavirus In Nigeria Through Ties-Strength Threshold On A Cas ...
Journal: Technology Reports of Kansai University, 2020
Author: . Ojugo, A. A., Oyemade, D. A.
Production of Biodiesel from Nigeria Restaurant Waste Cooking Oil using Blender.
Journal: International Journal of Renewable Energy Research, 2013
Author: Samuel, O.D., Waheed, M.A., Bolaji B.O. and O.U. Dairo
Man Power Prediction for Nigeria Liquefied Natural Gas Industry
Journal: Nigeria journal of Engineering Management, 2006
Author: Akpoturi P.E
Porosity-Permeability Regimes in Reservoirs for Hydrocarbon Prospectivity in Nembe Creek Field, Nige ...
Journal: Journal of Applied Geology and Geophysics, 2017
Author: G. I. Alaminiokuma and W. N. Ofuyah
Physico-Chemical and Bacteriological Assessment of Abattoir Effluents and its effect on Agbarho Rive ...
Journal: Nigerian Journal of Applied Science, 2017
Author: Asibor, I., Edjere, O., and Ofejiro, P.
Simulation and experimental verification of completely closed cavity die forging on a mechanical pre ...
Journal: Proc. Institution of Mechanical Engineers, 1989
Author: IBHADODE, A.O.A. and DEAN, T.A
Development of water hyacinth briquetting machine
Journal: International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), 2016
Author: Modestus Okwu, Adeyemi I. Olabisi, ThankGod E. Boye, Ezurike O. Benjamin
Forecasting Price Direction and Spread Options in Oil Volatility
Journal: Computing, Information Systems, Development Informatics Allied Research Journal (CISDIAR Journal), 2017
Author: A.A. Ojugo and D. Allenotor.,
Polychlorinated Biphenyls (PCBs) levels in Cured Paints from Southern Nigeria
Journal: Nigerian Journal of Applied Sciences, 2017
Author: Edjere, O., Asibor, I. and Otolo, S, Bassey, U.
Evaluation of Pure Aluminium Inoculated with Varying Grain Sizes of an Agro-waste based Inoculant
Journal: Advances in Science, Technology and Engineering Systems Journal (ASTESJ), 2017
Author: Adeyemi I. Olabisi, Thankgod E. Boye, Emagbetere Eyere
Design and Finite Element Analysis of Double - Acting, Double - Ends Hydraulic Cylinder for Industri ...
Journal: American Journal of Engineering Research (AJER), 2017
Author: ThankGod E. Boye, Adeyemi, I. Olabisi,Eyere E. Emagbetere
Evaluation of the Cost and Effect of Industrial Accidents
Journal: European Journal of Scientific Research, 2015
Author: Yusuf, T.A., Ismaila, S.O., Kuye, S.I. and Samuel, O.D.
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: International Journal of Machine Tools and Manufacture, 2004
Author: P.E. Amiolemhen, A.O.A. Ibhadode
MONITORING THE PRODUCTION PROCESS OF LASCTIC ACID BACTERIA USING HPLC
Journal: nternational Journal of Health and Medicine Vol 1(2) Jul-Sep 2016, 2016
Author: OKORHI FOLAWE BEATRICE BASSEY UWEM
Experimental Study on a Line-Axis Concentrating Solar Energy Collector for Water Heating
Journal: Industrial Engineering, 2017
Author: Frederick Ikpakwu, Anthony Okoronkwo, Modestus Okwu, Emmanuel Anyanwu
Shot Configuration Suitable for Optimizing Foldage and Offset around Areas with Non-Seismic Objects
Journal: AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, 2013
Author: G. I. Alaminiokuma and D. O. Ogagarue
Derivation of the von Mises and Tresca yield loci in plane stress from the yield surface in three di ...
Journal: Journal of the Nigerian Institution of Production Engineers, 1993
Author: IBHADODE, A.O.A
Green Synthesis of Ag/Ag2O Nanoparticles Using Aqueous Leaf Extract of Eupatorium odoratum and Its A ...
Journal: Molecules, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe, Anthony C. Ekennia, Christopher U. Sonde and Richard C. Ehiri
LED Light a futuristic Technology for African Rural Electrification
Journal: Journal of Innovative Systems Design and Engineering, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles, ONYAN AARON OKIEMUTE
Monitoring the Production process of Friendly Bacteria using
Journal: International journal of Health and medicine, 2016
Author: Okorhi Folawe Beatrice and Bassey Uwem
Using EF, PLI AND IGEO for the assessment of heavy metal pollution and sediment quality of Asejire R ...
Journal: International Journal of Environment and Pollution Research, 2015
Author: Asibor, I. G., Edjere, O., Adeniyi, F. and Ogundele, O.
A Financial Option Model for Pricing Cloud Computational Resources Based on Cloud Trace Characteriza ...
Journal: IEEE African Journal of Computing ICT, 2015
Author: Allenotor, D., Oyemade, D., Ojugo, A.
A Time Function Havlena and Odeh MBE Straight Line Equation
Journal: Onepetrol Journal, 2015
Author: Stanley Buduka., Biu Victor T., and Okotie Sylvester
A Financial Option Based Price and Risk Management Model for Pricing Electrical Energy in Nigeria
Journal: Advances in Multidisciplinary and Scientific Research Journal, 2017
Author: D. Allenotor and A.A. Ojugo
Antimicrobial activity of chemical bioactive compounds from the chloroform extract of the aerial par ...
Journal: International Journal of Biological and Chemical Sciences, 2016
Author: Christiana Ene OGWUCHE and Oghenekohwiroro EDJERE
Risering of a Four-Cavity Die Production Mould by Convectional Method
Journal: Advanced Materials Research, 1994
Author: Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata
The Capability of using GIS in Managing Environmental Problem in the Niger Delta
Journal: Journal of Empirical Research., 2006
Author: Onosemuode, C and Okhae, S.E.
Geoelectrical logging for well screening in prolific aquifers in Ubima, Ikwerre Local Government Are ...
Journal: African Journal of Environmental Science and Technology, 2017
Author: G. I. Alaminiokuma, T. Warmate and J. E. Emudianughe
2D static failure prediction for critical stresses of an automobile tire sidewall using MATLAB PDETo ...
Journal: IOSR-Journal of Mechanical Civil Engineering,, 2014
Author: Ihueze, C.C., Mgbemena, C.O., Menon, A.R.R.
The Effect of Calcium Carbonate at Low Volume Fractions On the Mechanical Properties of Polypropylen ...
Journal: Journal of Engineering and Applied Sciences, , 2010
Author: Mgbemena, C.O., Ubani, N.O., Mgbemena, C.E.
Estimation of pressdie system stiffness in mechanical press forging
Journal: Journal of the Nigerian Institution of Production Engineers, 1994
Author: IBHADODE, A.O.A. and DEAN, T.A
Use of inequalities in the determination of control systems compensation parameters
Journal: Advances in Modeling Analysis C. AMSE Press, 1993
Author: IBHADODE, A.O.A
Electrical Properties Correlations for The Niger Delta Depobelts
Journal: Petroleum Technology Development Journal, 2016
Author: Oscar I. O. Ogali, Julius O. Otiko, Wilfred C. Okologume
Computational Approach to Fracture Modelling of Polypropylene/Talc Composites.
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2012
Author: Mgbemena, C.O., Okoye, O.A.
Enabling a Viable Technique for the Optimization of LNG Carrier Cargo Operations
Journal: Journal of Marine Science and Application, 2016
Author: Onakoya Rasheed Alaba T. C. Nwaoha and M. O. Okwu
The Effect of Billet Location on Completely Closed Cavity Die Forging
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Reservoir Management Practice, Key to Optimum recovery
Journal: Multi- Disciplinary Engineering journal of Research Development, 2008
Author: Akpoturi P.E and Otitigbe F
Computational Modeling of Extracellular Matrix Protein Stamping on Hard Substrates for Biomedical Mi ...
Journal: Advances in Life Science and Technology, , 2014
Author: Aduloju, S.C., Nima, R., Mgbemena, C.O., Soboyejo, W.O.
Assessment of the Impacts of Refinery Effluent on the Physico-chemical Properties of Ubeji Creek, De ...
Journal: Journal of Environmental Analytical Toxicology , 2017
Author: Eunice OE, Frank O, Voke U, Godwin A