PUBLICATIONS
Derivation of the von Mises and Tresca yield loci in plane stress from the yield surface in three di ...
Journal: Journal of the Nigerian Institution of Production Engineers, 1993
Author: IBHADODE, A.O.A
Development and Assessment of Composite Brake Pad Using Pulverized Cocoa Beans Shells Filler
Journal: International Journal of Materials Science and Applications, 2016
Author: Adeyemi Ibukun Olabisi., Ademoh Nuhu. Adam, Okwu Modestus Okechukwu,
Development of home made crucibles for traditional metal casting
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: IBHADODE, A.O.A.
Production of Biodiesel from Nigeria Restaurant Waste Cooking Oil using Blender.
Journal: International Journal of Renewable Energy Research, 2013
Author: Samuel, O.D., Waheed, M.A., Bolaji B.O. and O.U. Dairo
Evaluation of the Cost and Effect of Industrial Accidents
Journal: European Journal of Scientific Research, 2015
Author: Yusuf, T.A., Ismaila, S.O., Kuye, S.I. and Samuel, O.D.
ENERGY- CONTENT AND SPECTRAL ANALYSES OF SHOTS FOR OPTIMUM SEISMOGRAM GENERATION IN THE NIGER DELTA
Journal: International Journal of Geology, Earth Environmental Sciences, 2014
Author: Alaminiokuma G.I. and Emudianughe J.E.
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in Industry, Vol 33, Iss 1, Pp 11-17 (2011), 2011
Author: A. C. Igboanugo / A. O. A. Ibhadode / C. U. Atuanya
Effect of Turning Parameters on Metal Removal and Tool Wear Rates of AISI 1018 Low Carbon Steel.
Journal: Nigerian Journal of Technology,, 2016
Author: Mgbemena, C.O., Mgbemena, C.E., Ashiedu, F.I. Etebenumeh, G. O.
Design and Development of a Petrol-powered Hammer mill for rural Nigerian Farmers
Journal: Journal of Energy Technologies and Policy, 2014
Author: Adekomaya, S.O., Samuel, O.D
Seasonal Biodiversity Assessment of Benthic Macroinvertebrate of Asejire Reservoir, Southwest Nigeri ...
Journal: Journal of Sustainable Development, 2015
Author: Asibor, I. G.
Impact of biologically treated effluent on the physico-chemical quality of a receiving stream in Ile ...
Journal: Journal of Sustainable Development, 2015
Author: Asibor, G., Edjere, O. and Adeniyi, I. F.
Finite Element Analysis and Design Validation of High Pressure Gate Valve for a Typical Nigerian Oi ...
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: ThankGod E. Boye, Thaddeus C. Nwaoha and Adeyemi I. Olabisi
A Hybridized Analytic Model for the Formation of Student Groups
Journal: International Journal of Innovative Science, Engineering Technology, 2021
Author: David Enebeli, David Ademola Oyemade
Near-surface structural model for enhanced seismic data acquisition and processing in North-Central ...
Journal: AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, 2012
Author: G. I. Alaminiokuma and J. Amonieah
Performance Indicators for Sapele Thermal Power Station, Nigeria: 1997-2006
Journal: ADVANCED MATERIALS RESEARCH -ZUG-, 2012
Author: Obodeh, O. / Isaac, F.O. Contributors: Ibhadode, A. O. Akii
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
Performance of seismic detectors: a case study of the sensitivity of SM-4 geophones used in Nigeria
Journal: International Research Journal of Earth Sciences, 2017
Author: G.I. Alaminiokuma and W.N. Ofuyah
A Machine Learning Model for the Classification of Human Emotions
Journal: International Journal of Computer Sciences and Engineering , 2024
Author: D. A. Oyemade, D. F. Seregbe
The shere igneous complex central Nigeria. Geochemical constraints on the origin of peralkaline and ...
Journal: Geologie en Mujinbow, 1990
Author: Imeokparia, E.G., and Badejoko, T.A. 1990
Physico-Chemical and Bacteriological Assessment of Abattoir Effluents and its effect on Agbarho Rive ...
Journal: Nigerian Journal of Applied Science, 2017
Author: Asibor, I., Edjere, O., and Ofejiro, P.
Metalization of the Ririwai Complex, Northern Nigeria and the Geochemical Evolution of Acid Magmas i ...
Journal: Geological Society of America, 1989
Author: Chalokwu, C.I. and Imeokparia, E.G.
Distribution pattern, sources and ecological risk assessment of polycyclic aromatic hydrocarbons (PA ...
Journal: Journal of Chemical Society of Nigeria, 2025
Author: Okonkwo, E.O., Nwajei, G.E., Agbaire, P.O. and Tesi, G.O
Biosynthesis, Electrochemical,Antimicrobial and Antioxidant Studies of Silver Nanoparticles Mediated ...
Journal: J Clust Sci, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe,Omolola E. Fayemi, Anthony C. Ekennia, Eno E. Ebenso Louwrens R. Tiedt
Stochastic Analysis of the Effect of Asset Prices to a Single Economic Investor
Journal: Bulletin of Mathematical Sciences and Applications, 2016
Author: E. Ekuma-Okereke, J. T. Eghwerido, E. Efe-Eyefia, S. Zelibe
UNSTEADY MHD MIXED CONVECTION FLOW PAST AN OSCILLATING PLATE WITH HEAT SOURCE/SINK
Journal: Journal of Naval Architecture and Marine Engineering, 2014
Author: A. M. Okedoye
Bioethanol production from corn stover using Saccharomyces cerevisiae
Journal: International Journal of Scientific Engineering Research, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben and Nsidibe-Obong Ekpe Moses
The Influence of Process Variables on Load and Accuracy When Forging in a Completely Closed Cavity D ...
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Institution of Mechan, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Crystal structure of tetraaquabis(3,5-diamino- 4H-1,2,4-triazol-1-ium)cobalt(II) bis[bis(pyridine-2, ...
Journal: Acta Cryst, 2015
Author: Atim Johnson, Justina Mbonu, Zahid Hussain, Wan-Sin Lohe and Hoong-Kun Funf,
Work-Trips Generation in Warri and Environs: A Spatial Perspective
Journal: Journal of Environmental Studies, 2007
Author: Onosemuode, C and Onosemuode, K. E . .
Towards a Unified University Information System: Bridging the Gap of Data Interoperability
Journal: American Journal of Software Engineering, 2014
Author: Orobor Anderson Ise
Development of a Manual Metal Arc Welding Flux from Local Raw Materials in Nigeria
Journal: Applied Mechanics and Materials, 2004
Author: Oyawale Festus Adekunle, Odior Andrew Oyakhobo, Ibhadode Akii
Risering of a Four-Cavity Die Production Mould by Convectional Method
Journal: Advanced Materials Research, 1994
Author: Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata
Hydrological Analysis of Onitsha North East Drainage Basin Using Geoinformatic Techniques.
Journal: World Applied Sciences Journal , 2010
Author: Onosemuode C. Adetimirin O. I and Aboderin S. O.
Material Requirement Planning of MISO Production Process using Transfer Function: A Case Study of So ...
Journal: Journal of the Nigeria Association of Mathematical Physics. , 2016
Author: S. Okiy, B.U. Oreko and C.C. Nwobi-Okoye
The Communicative Efficiency of Maps in Tourism Development
Journal: Journal of Research in Tourism., 2007
Author: Onosemuode, Christopher
Lateral Rock Property Prediction by Post Stack Acoustic Impedance Inversion: A Case Study from Offsh ...
Journal: International Journal of Sciences: Basic and Applied Research, 2016
Author: Difference Odeyovwi Ogagarue, Godswill Igoni Alaminiokuma
Report on the Evaluation of Ugua J2 and J3 Reservoir Performance
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: 1 Okotie Sylvester, 2 Ikporo Bibobra and 3 Ovuema Augustina
Development of a Reflectance Photoplethysmogram Based Heart Rate Monitoring Device
Journal: International Journal of Medical Imaging, 2017
Author: Kingsley Okeoghene Enalume, Ayebatonye Marttyns Epemu
Assessment of the activities of scavengers and their economic impacts in waste recovery in Warri met ...
Journal: International Research Journal of Public and Environmental Health, 2017
Author: Asibor Godwin, Edjere Oghenekohwiroro
Problems of Environmental Pollution and Control in the Nigeria Petroleum Industry
Journal: journal of research in Engineering and Environmental Studies, 2006
Author: Akpoturi P.E and Ndukwe J.O
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: International Journal of Machine Tools and Manufacture, 2004
Author: P.E. Amiolemhen, A.O.A. Ibhadode
Time-Lapse Seismic Acquisition in the Niger Delta: Challenges and Successes
Journal: Geosciences, 2017
Author: G. I. Alaminiokuma, W. N. Ofuyah
A Classification Model Based on Machine Learning for Detecting Racist Comments on Social Media Platf ...
Journal: Journal of Behavioural Informatics, Digital Humanities and Development Research., 2021
Author: Allenotor, D. Oyemade, D. A.
APPLICATION OF CASSAVA PEELS ACTIVATED CARBON IN THE TREATMENT OF OIL REFINERY WASTEWATER A COMPARA ...
Journal: Journal of Ecological Engineering, 2016
Author: Kigho Moses Oghenejoboh, Smith Orode Otuagoma, Evuensiri Onogwharite Ohimor
Safety evaluation of human exposure to potentially toxic metals in the organs of sheep from southern ...
Journal: Journal of Trace Element and Minerals, 2024
Author: Tesi, G.O., Iniaghe, P.O., Ogwu, I.F., Okunoja, H.B. Iwegbue, C.M.A. and Egobueze, F.E.
Reservoir Management Practice, Key to Optimum recovery
Journal: Multi- Disciplinary Engineering journal of Research Development, 2008
Author: Akpoturi P.E and Otitigbe F
Computational Approach to Fracture Modelling of Polypropylene/Talc Composites.
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2012
Author: Mgbemena, C.O., Okoye, O.A.
Analysis of Coconut Ester(Biodiesel) and Fossil Diesel Blending: Properties and Corrosion Characteri ...
Journal: Nigeria Journal of Technology, NIJOTECH. , 2016
Author: Samuel , O.D, Ashiedu, F.I. and Oreko B.U.
Design of a PV-Connected DC-DC Converter
Journal: International Journal of Emerging trends in Engineering and Development, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Development and Evaluation of Maize Husks (Asbestos-free) Based Brake Pad
Journal: Industrial Engineering Letters, 2015
Author: Nuhu A. Ademoh and Adeyemi, I. Olabisi.