PUBLICATIONS
Cadastral Maps and Squatter (Slum) Settlement Development in Urban Growth.
Journal: Indian Journal of Multidisciplinary Research,, 2007
Author: Onosemuode, C and Gambo, I. D
A Validation Method of Computational Fluid Dynamics (CFD) Simulation against Experimental Data of Tr ...
Journal: American Journal of Engineering Research (AJER), 2017
Author: ThankGod E. Boye, Thaddeus C. Nwaoha Samuel D. Olusegun, Festus I. Ashiedu
Thermal behavior and UV properties of Organomodified kaolin oleochemically derived from Rubber Seed ...
Journal: Journal of Surface Engineered Materials and Advanced Technology,, 2013
Author: Mgbemena, C.O., Ibekwe, N.O., Mohamed, A.P., Menon, A.R.R. Sukumar, R.
Levels of endocrine disrupting organochlorine pesticides in herbal medicines from Bayelsa State, Nig ...
Journal: Toxicology and Environmental Health Sciences, 2024
Author: Tesi, G.O., Felagha, I., Ogbuta, A.A., Ogbomade, W.E., Obodoka, G.C., Iniaghe, P.O. and Kpomah, E.D.
A Three Tier Learning Model for Universities in Nigeria
Journal: Journal of Technologies in Society, 2016
Author: Oyemade, D. A., Akpojaro, J., Ojugo, A., Ureigho, R. J., Imouokhome, F. A., Omoregbee, E. U.
Experimental Study of Induced Vibration and Work Surface Roughness in the Turning of 41Cr4 Alloy S ...
Journal: IJIRSET , 2013
Author: Eze S.C., Izelu, C.O., Oreko B.U., Edward B.A
Determination of the optimum mix of sawdust and coal dust as a fue
Journal: Technical Transactions of the Nigerian Institution of Production Engineers,, 2000
Author: OSARENMWINDA, J.O. and IBHADODE, A.O.A.
Advances in Materials and Systems Technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
Time-Lapse Seismic Acquisition in the Niger Delta: Challenges and Successes
Journal: Geosciences, 2017
Author: G. I. Alaminiokuma, W. N. Ofuyah
Development of water hyacinth briquetting machine
Journal: International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), 2016
Author: Modestus Okwu, Adeyemi I. Olabisi, ThankGod E. Boye, Ezurike O. Benjamin
Development of a Production Mould for Casting Single - Cylinder Engine Pistons
Journal: ADVANCED MATERIALS RESEARCH -ZUG, 2007
Author: Zhengwuvi, L. B. / Ibhadode, A. O.A.
Economic Evaluation of Electrical Submersible Pump (ESP) and Gas Lift Well For Production Optimizati ...
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Ezekiel Chuks., Okotie Sylvester.and Dulu Appah
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Strategies 1: Enhancing Environmenatally Conscious Engineering safety Practices in Nigeria
Journal: journal of Engineering Studies, 2005
Author: Akpoturi P.E
Introduction to Manufacturing Technology
Journal: Open Journal of Energy Efficiency, 2013
Author: Mala Abba-Aji, Vincent Ogwagwu, Bukar Umar Musa, Prof. A.O. Akii Ibhadode (Contributor)
An Optimal Investment Returns with N-Step Utility Functions
Journal: Bulletin of Mathematical Sciences and Applications, 2016
Author: EGHWERIDO Joseph Thomas and OBILADE Titilola
Design of DC-link Voltage Controller and Grid Current Controller in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
The Assessment of Baseline Ecological Data for Environmental Management: A Case study of the Coasta ...
Journal: The Nigeria Academic Forum, 2004
Author: Onosemuode Christopher
Sugar Cane Cellulosic Waste as a Biofuel Generating Agricultural Residue
Journal: British J Renewable energy, 2016
Author: E. E. Elemike, K. A. Ibe, J. C. Onwuka
Carbon Nanotubes: The Building Blocks of Nanotechnology Development
Journal: J.Nanotech. Prog. Int. , 2016
Author: Boye E. T., Achadu J.O., Oreko B.U., Samuel O.D.
The Effect of Calcium Carbonate at Low Volume Fractions On the Mechanical Properties of Polypropylen ...
Journal: Journal of Engineering and Applied Sciences, , 2010
Author: Mgbemena, C.O., Ubani, N.O., Mgbemena, C.E.
Development of Asbestos-Free Automotive Brake Pad Using Ternary Agro-Waste Fillers
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: Adeyemi, I. Olabisi, Nuhu, A. Ademoh, Thankgod E. Boye
Corrosion Rates and its Impact on Mild Steel in Some Selected Environments.
Journal: Journal of Scientific and Engineering Research., 2016
Author: Umeozokwere, A. O., Mbabuike I.U., Oreko B.U, and Ezemuo, D.T.
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
Artificial neural network model for cost optimization in a dual-source multi-destination outbound sy ...
Journal: PRODUCTION MANUFACTURING, 2018
Author: Modestus O. Okwu, Benjamin Ufuoma Oreko, Stanley Okiy, Austin C. Uzorh and Onyewuchi Oguoma
CONTAMINATION OF SOIL AND RIVERS BY LEAD FROM USED ENGINE OIL: A CASE STUDY OF CHOBA COMMUNITY IN PO ...
Journal: Pollution Research., 2011
Author: K.M. OGHENEJOBOH and E.O. OHIMOR
Design and Manufacture of Manual Electrode Coating Machine for Small Scale Manufacture
Journal: Nigerian Journal of Engineering Research and Development, 2004
Author: Oyawale F. A. and Ibhadode A. O. A
Tourist Sites in Delta State, Nigeria
Journal: Achieving Millennium Development Goals Through Mapping, David A. Musa and W.D.C Wokoma (ed), 2007
Author: Onosemuode, C .
Geochemistry of Marbles and Calc-silicate rocks in the Igarra Schist Belt, southwest Nigeria
Journal: . African Journal of Science and Technology,, 1995
Author: Emofurieta, W.O. Imeokparia, E.G., and Ayuk,
Development of useful products from agro-waste and polythene bags
Journal: Conference on New Products and Technologies for Small and Medium Enterprises,, 2001
Author: IBHADODE, A.O.A
The Role of Solid Mineral Mapping for Sustainable Development in Nasarawa State
Journal: M.E Ufuah and R.O. Olomo [ed.] Cartography and GIS for Sustainable Solid Mineral Development in Nigeria. A Publication, 2005
Author: Onosemuode Christopher
A Mixed Model Analysis of a Fertilizer Experiment on Oil Palm in Nigeria
Journal: Agricultural Sciences, 2016
Author: Edwin A. Iguodala, Eghwerido Joseph Thomas, Austin Edokpayi, Obilade Titilola
Hyperelastic modelling and limit stress prediction of a P195/55 R16 85H Radial tire developed from N ...
Journal: American Journal of Material Sciences and Applications., 2014
Author: Ihueze, C.C, Mgbemena, C.O.
2014: Heavy Metal Contamination and Distribution in Soils around Pb-Zn mines of Abakaliki district, ...
Journal: Frontiers in Geosciences, 2014
Author: Onyeobi, T.U.S. and Imeokparia, E.G.,
DETECTION OF CRACK LOCATION AND SIZE IN STRUCTURES USING HIGHER HARMONICS OF EXCITED FREQUENCY
Journal: Research Journal in Engineering and Applied Sciences, 2013
Author: Ezekiel Kingsley C., Okwu Modestus O., Johnson A. Fadeyi
Evaluation of the Levels of Phthalate Ester Plasticizers in Surface Water of Ethiope River System, N ...
Journal: Journal of Applied Sciences and Environmental Management, 2016
Author: Edjere, O., Asibor, I.G. and Otolo, S.E.
Creep function Parameter Analysis for Optimum Design with Calcium Carbonate Carbonate Nanofiller Pol ...
Journal: Journal of Minerals and Materials Characterization and Engineering , 2011
Author: Ihueze, C.C., Mgbemena, C.O., Nnuka, E.E.
Eco-friendly synthesis of AgNPs using Verbascum thapsus extract and its photocatalytic activity
Journal: Matt lett, 2016
Author: Elias E. Elemike, Damian C. Onwudiwe, Zimbili Mkhize
A HIGHER ODER POLYNOMIAL FOR OPTIMAL PRICING AND REPLENISHMENT STRATEGIES FOR A RETAIL/DISTRIBUTION ...
Journal: International Journal of Scientific Engineering and Applied Science (IJSEAS), 2015
Author: A. M. Okedoye,P PPh.D
Development and Evaluation of Maize Husks (Asbestos-free) Based Brake Pad
Journal: Industrial Engineering Letters, 2015
Author: Nuhu A. Ademoh and Adeyemi, I. Olabisi.
Computer-Simulated Delta () For Vertical Transversely Isotropic (VTI) Media in Two Depobelts of the ...
Journal: The International Journal Of Engineering And Science, 2014
Author: Emudianughe, E. J , Alaminiokuma, G. I. and Ojugo, A. A
Empirical Method to Predict the Performance of Human Powered Mono Hull Boats
Journal: International Journal of Engineering and Technologies, 2016
Author: Pereowei G. Ombor, Agbakwuru Jasper, Modestus O. Okwu,
Software Testing Framework for the Financial Market
Journal: American Journal of Software Engineering and Applications, 2024
Author: D. A. Oyemade
Antimicrobial activity and Chemical Composition of the flowers of Aspilia africana
Journal: Advances in Life Science and Technology, 2014
Author: Salit Bako, Sherah, Emmanuel Usman Onche, Idongesit Justina Mbonu, Paul Ngbede Olotu and Labumi Lajide.
The Pareto principle and Hazard model as tools for appropriate scheduled maintenance in a manufactur ...
Journal: African Journal of Science, Technology, Innovation and Development, 2016
Author: Fadeyi, J.A., Okwu, M.O., Mgbemena, C.O., Ezekiel, K.C. (2016).
APPLICATION OF LINEAR PROGRAMMING MODEL AND SENSITIVITY ANALYSIS IN MULTI-PRODUCT MULTI-DESTINATION ...
Journal: Canadian International Journal of Science and Technology, 2017
Author: Modestus O. Okwu,, F. I. Ashiedu, Joachim Gidiagba, Adedoyin Adesuji
Automated Student Attendance Management System Using Face Recognition
Journal: International Journal of Educational Research and Information Science, 2018
Author: Ofualagba Godswill, Omijie Osas, Orobor Anderson, Ibhadode Oseikhuemen, Odiete Etse
A Machine Learning Model for the Classification of Human Emotions
Journal: International Journal of Computer Sciences and Engineering , 2024
Author: D. A. Oyemade, D. F. Seregbe
A Deterministic Approach to Measurement of Noise Operations on 41Cr4 Alloy Steel using Response Surf ...
Journal: International Journal of Mechanical Engineering and Applications (IJMEA) , 2016
Author: Obinabo E. C. Nwaoha T. C., Ashiedu F. I., and Izelu C. O.