PUBLICATIONS
A Three Tier Learning Model for Universities in Nigeria
Journal: Journal of Technologies in Society, 2016
Author: Oyemade, D. A., Akpojaro, J., Ojugo, A., Ureigho, R. J., Imouokhome, F. A., Omoregbee, E. U.
DETECTION OF CRACK LOCATION AND SIZE IN STRUCTURES USING HIGHER HARMONICS OF EXCITED FREQUENCY
Journal: Research Journal in Engineering and Applied Sciences, 2013
Author: Ezekiel Kingsley C., Okwu Modestus O., Johnson A. Fadeyi
Application of Sinusoidal Model to a Maintenance Time Series Data.
Journal: Fupre Journal of Scientific and Industrial Research (FJSIR), 2017
Author: Popoola, E, O. and Ashiedu F. I.
Automobile disk brake pads made from palm kernel shell
Journal: Conference on New Products and Technologies for Small and Medium Enterprises,, 2001
Author: IBHADODE, A.O.A. and OLADEINDE, M.H
An investigation of the efficacy of enhanced oil recovery by means of micro-organisms in Niger Delta ...
Journal: J. Pet. Gas Explor. Res., 2014
Author: - Ikporo Bibobra. and Okotie Sylvester.
PERFORMANCE OF AN AUTOMOTIVE BUMPER FROM LALLOH 2 (Corchorustriden L.) PLANT FIBRE REINFORCED EPOXY ...
Journal: Nigerian Journal of Technology, 2016
Author: M. Sumaila and A. O. A. Ibhadode
Utilization of cellulosic cassava waste for bio-ethanol production
Journal: JECE, 2015
Author: Elias E.Elemike, Ojiefoh C.Oseghale, Anthony C.Okoye
Technology transfer and continuing engineering education
Journal: BeninJournal of Educational Studies, 1999
Author: IBHADODE, A.O.A
Procedure for calculating shear rate in the reservoir in Niger Delta
Journal: Journal or Engineering and Energy Research, 2014
Author: Akpoturi Peters
Biodiesel development strategies in fossil-driven economy of Nigeria.
Journal: AKGEC Journal of Technology,, 2012
Author: Samuel ,Olusegun .David
APPLICATION OF CASSAVA PEELS ACTIVATED CARBON IN THE TREATMENT OF OIL REFINERY WASTEWATER A COMPARA ...
Journal: Journal of Ecological Engineering, 2016
Author: Kigho Moses Oghenejoboh, Smith Orode Otuagoma, Evuensiri Onogwharite Ohimor
Simulation and experimental verification of completely closed cavity die forging on a mechanical pre ...
Journal: Proc. Institution of Mechanical Engineers, 1989
Author: IBHADODE, A.O.A. and DEAN, T.A
On the realization of the Equilibrium State of FluidBorne Marine Vessels
Journal: International Journal of Science and Technology (IJST) , 2016
Author: Obinabo E. C., Nwaoha T. C. and Ashiedu F. I.
Analytical Solution of MHD Free Convective Heat and Mass Transfer Flow in a Porous Medium.
Journal: The Pacific Journal of Science and Technology, 2013
Author: Akindele Michael Okedoye Ph.D.
Analyzing Thermal Insulation for Effective Hydrate Prevention in Conceptual Subsea Pipeline Design
Journal: International Journal of Current Engineering and Technology, 2015
Author: Okologume Wilfred and Dulu Appah
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
Predicting Diffusion Dynamics Of The Coronavirus In Nigeria Through Ties-Strength Threshold On A Cas ...
Journal: Technology Reports of Kansai University, 2020
Author: . Ojugo, A. A., Oyemade, D. A.
Hydrocarbon Degradation Potentials of Indigeneous Fungal Isolates from a Petroleum Hydrocarbon Conta ...
Journal: Global Advanced Research Journal of Environmental Science and Toxicology, 2014
Author: Iheanacho, C. C., Okerentugba, P. O., Orji, F. A. and Ataikiru, T. L.
Using factor Cluster analysis and enrichment methods to evaluate impact of cement production on str ...
Journal: Advances in Applied Science Research, 2011
Author: Ameh, E.G., Kolawole, M.S. and Imeokparia, E.G.
Characterization of Kaolin intercalates of Oleochemicals derived from Rubber Seed (Hevea brasiliensi ...
Journal: Journal of King Saud University-Science, 2013
Author: Mgbemena, C.O., Ibekwe, N.O., Mohamed, A.P., Menon, A.R.R. Sukumar, R.
Estimation of Pressure Drop, Liquid Holdup and Flow Pattern in a Two Phase Vertical Flow
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Omon E., Dulu A. and Okotie S.
The Impact of 3D Printing Technology to the Nigerian Manufacturing GDP
Journal: Modern Mechanical Engineering, 2018
Author: A. Balogun, V. , B. Otanocha, O. and O. Ibhadode, A.
Cadastral Mapping using GIS Techniques in Urban Development
Journal: The Nigeria Academic Forum, 2006
Author: Onosemuode, Christopher
Optimisation Of Alkaline Ethanolysis Of Biodiesel Yield From Nigerian Coconut Oil Using One Variable ...
Journal: JENRM, 2014
Author: Samuel, O.D, Okwu, M.O., Oreko B. and Amosun S.T
Advances in materials and systems technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Strategies 1: Enhancing Environmenatally Conscious Engineering safety Practices in Nigeria
Journal: journal of Engineering Studies, 2005
Author: Akpoturi P.E
Effects of Sodium Hydroxide Concentration on the Physical Properties of Zeolite Produced from Local ...
Journal: European Journal of Scientific Research, 2011
Author: Oghenejoboh, K. M. and Ohimor, E. O.
The Effect of Billet Location on Completely Closed Cavity Die Forging
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
The Use of Geoinformatics Techniques in Site Selection for solid Waste Dump A Case Study of Warri an ...
Journal: International Journal of Science and Research (IJSR), 2017
Author: Christopher Onosemuode and Omorogbe Osemwegie
A stochastic model for face detection
Journal: Advances in Multidisciplinary and Scientific Research Journal, 2016
Author: A.A. Ojugo., D.A. Oyemade., D. Allenotor
Carbon Nanotube: The Building Blocks of Nanotechnology Development.
Journal: J.Nanotech. Prog. Int. (JONP) , 2016
Author: Boye, E.T., Achadu, J.O, Oreko, B.U and Samuel, O.D
Determination of Thermal Properties of Rock Samples Using Modified Thermal Block Method
Journal: Open access e-Journal, 2012
Author: Olukayode D. Akinyemi, Yemi S. Onifade, Biodun S. Badmus and O.S. Awokola
ONLINE MONITORING OF SOFT SENSOR PERFORMANCE: A CASE STUDY OF CEMENT CLINKER QUALITY PARAMETERS SOFT ...
Journal: IJRET: International Journal of Research in Engineering and Technology, 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in Industry, Vol 33, Iss 1, Pp 11-17 (2011), 2011
Author: A. C. Igboanugo / A. O. A. Ibhadode / C. U. Atuanya
Productivity Pattern of Warri Refining and Petrochemicals Limited A principal Component Analysis App ...
Journal: International Journal of Development Research, 2016
Author: Ashiedu F. I. and Izelu C. O.
Predicting Crude Oil Sales in NNPC Mega Station Awka, Anambra State, Nigeria.
Journal: Journal of Scientific and Engineering Research., 2016
Author: Umeozokwere, A.O., Oreko B.U., Offor I.C., Udoye, B.O.
Modelling of Multiphase Flow Metering for Crude Oil Production Monitoring
Journal: International Journal of Current Engineering and Technology, 2015
Author: Ego C. Obukohwo, Okologume C. Wilfred, Dulu Appah and Marcus B. Umeleuma
Thermal behavior and UV properties of Organomodified kaolin oleochemically derived from Rubber Seed ...
Journal: Journal of Surface Engineered Materials and Advanced Technology,, 2013
Author: Mgbemena, C.O., Ibekwe, N.O., Mohamed, A.P., Menon, A.R.R. Sukumar, R.
Design and Development of a 10 Million Liters Capacity Petroleum Product Storage Tank.
Journal: The International Journal Of Engineering And Science (IJES)., 2016
Author: D.R. Enarevba, C.O. Izelu, B.U. Oreko and E. Emagbetere
Shot Configuration Suitable for Optimizing Foldage and Offset around Areas with Non-Seismic Objects
Journal: AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, 2013
Author: G. I. Alaminiokuma and D. O. Ogagarue
Hyperelastic modelling and limit stress prediction of a P195/55 R16 85H Radial tire developed from N ...
Journal: American Journal of Material Sciences and Applications., 2014
Author: Ihueze, C.C, Mgbemena, C.O.
Environmental Impact Of Mining On Agricultural Activities: A Case Study Of Bukuru, Jos.
Journal: International Journal Of Sustainable Development., 2010
Author: Onosemuode C. Akhimien F. O
Solving For Computational Intelligence the Timetable-Problem
Journal: , Advances in Multidisciplinary Research Journal, 2016
Author: Ojugo, A. A., Oyemade, D. A., Allenotor, D.
Metalization of the Ririwai Complex, Northern Nigeria and the Geochemical Evolution of Acid Magmas i ...
Journal: Geological Society of America, 1989
Author: Chalokwu, C.I. and Imeokparia, E.G.
Picosecond laser surface micro-texturing for the modification of aerodynamic and dust distribution c ...
Journal: Cogent Engineering , 2016
Author: Omonigho B. Otanocha, Li Lin, Yuanye Zhou, Shan Zhong Liu Zhu
Creep function Parameter Analysis for Optimum Design with Calcium Carbonate Carbonate Nanofiller Pol ...
Journal: Journal of Minerals and Materials Characterization and Engineering , 2011
Author: Ihueze, C.C., Mgbemena, C.O., Nnuka, E.E.
Man Power Prediction for Nigeria Liquefied Natural Gas Industry
Journal: Nigeria journal of Engineering Management, 2006
Author: Akpoturi P.E
THE SECURITY PROVIDER... Social Responsibility and Customer Satisfaction
Journal: Security, 2020
Author: Onakpoma Oboroghenerukohwo
Alkaline Phosphate Level Activity in Crude oil Contaminated Soil Bio remediated with natural sources
Journal: journal of Engineering and Applied Scientific Research, 2014
Author: Akpoturi P.E
ENERGY- CONTENT AND SPECTRAL ANALYSES OF SHOTS FOR OPTIMUM SEISMOGRAM GENERATION IN THE NIGER DELTA
Journal: International Journal of Geology, Earth Environmental Sciences, 2014
Author: Alaminiokuma G.I. and Emudianughe J.E.