PUBLICATIONS
Laser Surface Micro/nano Patterning for Improving Aerodynamic Performance
Journal: Ph. D Thesis, 2015
Author: Otanocha, O.B
Investigating the Calibration Curves for a Two Component Cutting Tool Lathe Dynamometer Using Finite ...
Journal: International Journal of Engineering Research in Africa, 2010
Author: Osezua Obehi Ibhadode, Ishaya Musa Dagwa, Akii Okonigbon Akhaehomen Ibhadode
Procedure for calculating shear rate in the reservoir in Niger Delta
Journal: Journal or Engineering and Energy Research, 2014
Author: Akpoturi Peters
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
Nigeria Natural Gas Supply Preference and the Environment
Journal: Journal of Energy Technologies and Policy, 2014
Author: Wilfred Chinedu Okologume
Strategies 1: Enhancing Environmenatally Conscious Engineering safety Practices in Nigeria
Journal: journal of Engineering Studies, 2005
Author: Akpoturi P.E
The Capability of using GIS in Managing Environmental Problem in the Niger Delta
Journal: Journal of Empirical Research., 2006
Author: Onosemuode, C and Okhae, S.E.
Perception of Life in Rural Areas: A Case Study of Ughelli South Local Government Area.
Journal: The Nasara Journal of Humanities., 2003
Author: Onosemuode C.
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
Predicting Reservoir Behavior using Mathematical Models 3 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
2D static failure prediction for critical stresses of an automobile tire sidewall using MATLAB PDETo ...
Journal: IOSR-Journal of Mechanical Civil Engineering,, 2014
Author: Ihueze, C.C., Mgbemena, C.O., Menon, A.R.R.
Computerised Design Approach to a Sub-Press Mould for Composite Materials Manufacture
Journal: al: Advanced Materials Research, 1994
Author: Ishaya Musa Dagwa, A.O. Akii Ibhadode
Strategies to enhance Environmenatally Conscious Engineering safety Practices in Nigeria
Journal: journal of Engineering Studies, 2005
Author: Akpoturi P.E
Time-Lapse Seismic Acquisition in the Niger Delta: Challenges and Successes
Journal: Geosciences, 2017
Author: G. I. Alaminiokuma, W. N. Ofuyah
A Method for Stimulation Candidate Well Selection
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
DEVELOPMENT OF ERASABLE WHITEBOARD MARKER INKS
Journal: Canadian International Journal of Science and Technology,, 2017
Author: Kindness Uyanga Paul Onaji Modestus O. Okwu.
The use of Remote Sensing Imageries in Monitoring Changes in Surface Water in Lake Chad Drainage Bas ...
Journal: Nigeria Journal of Tropical Geography., 2008
Author: Onosemuode C. Akhimien F. O. and Kundu J..
Assessment of the Social and Environmental Impacts of Keffi-Lafia Federal Highway.
Journal: International Journal of Physical Science. , 2011
Author: Onosemuode, C and Akwa, L
Hydrogeological Studies for Groundwater resource and its vulnerability to contamination in Owo, Sout ...
Journal: International Journal of Science and Research (IJSR), 2015
Author: Falowo, O.O, and Imeokparia, E.G
Water table regime in parts of Obio-Akpor local Government area of Rivers State, Nigeria
Journal: International Research Journal of Earth Sciences, 2017
Author: G. I. Alaminiokuma and W. N. Ofuyah
Effects of Self-regulated learning and Metacognitive learning cycle on the academic achievement of ...
Journal: Open Journal of Advanced Engineering Techniques, , 2013
Author: Inomiesa, E.A., Achufusi, N.N. Mgbemena, C.O.
Biodiesel development strategies in fossil-driven economy of Nigeria.
Journal: AKGEC Journal of Technology,, 2012
Author: Samuel ,Olusegun .David
Optimizing the Output Current for a DC-DC Converter
Journal: Journal of Control Theory and Informatics, International Institute for Science, Technology and Education, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles and Onyan Aaron Okiemute
Adsorption and desorption performances of Eichhornia crassipes (water hyacinth) roots and leaves pow ...
Journal: Ovidius University Annals of Chemistry, 2025
Author: Tesi, G.O., Ejeromedoghene, O., Alli, Y.A., Okunoja, H.B. and Ipeaiyeda, A.R.
Phytochemical screening, antioxidant and antimicrobial activities of Acalypha ciliata plant
Journal: Clinical phytoscience, 2016
Author: Oluwakayode Odeja, Christiana Ene Ogwuche, Elias Emeka Elemike and Grace Obi
Computational Modeling of Extracellular Matrix Protein Stamping on Hard Substrates for Biomedical Mi ...
Journal: Advances in Life Science and Technology, , 2014
Author: Aduloju, S.C., Nima, R., Mgbemena, C.O., Soboyejo, W.O.
Shot Configuration Suitable for Optimizing Foldage and Offset around Areas with Non-Seismic Objects
Journal: AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, 2013
Author: G. I. Alaminiokuma and D. O. Ogagarue
A new approach for the design of feedback control systems by the Bode Method
Journal: ournal of Electrical a nd Electronic Engineering ,, 1999
Author: IBHADODE, A.O.A.
Report on the Evaluation of Ugua J2 and J3 Reservoir Performance
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: 1 Okotie Sylvester, 2 Ikporo Bibobra and 3 Ovuema Augustina
Evaluation of Pure Aluminium Inoculated with Varying Grain Sizes of an Agro-waste based Inoculant
Journal: Advances in Science, Technology and Engineering Systems Journal (ASTESJ), 2017
Author: Adeyemi I. Olabisi, Thankgod E. Boye, Emagbetere Eyere
Robust Cellular Network for Rural Telephony in Southern Nigeria
Journal: pp. 125-132, 2013
Author: Ojugo, A. A., Yoro, R. E., Oyemade, D., Yeroku, M. O., Eboka, A. O., Ugboh, E., Aghware, F. O.
CONTAMINATION OF SOIL AND RIVERS BY LEAD FROM USED ENGINE OIL: A CASE STUDY OF CHOBA COMMUNITY IN PO ...
Journal: Pollution Research., 2011
Author: K.M. OGHENEJOBOH and E.O. OHIMOR
Towards a Software Cost Reduction Model
Journal: Benin Journal of Advances in Computer Science, 2018
Author: Oyemade, D. A, Onibere, E. A.
An Evolvable Framework for Metamorphics
Journal: Computing, Information Systems, Development Informatics Allied Research Journal, 2016
Author: Allenotor, David
Electricity Generation and Distribution in Nigeria: Technical Issues and Solutions.
Journal: International Journal of Engineering Science and Technology, 2011
Author: Chinwuko, E.C., Mgbemena, C.O., Ebhota, S.W Nwuba, E.I.U.
Remedation of Crude Oil-Polluted Surface Water Using Aqua-gel Bentonite, Periwinkle Shell Chitosin E ...
Journal: Journal of Ecology and Environment, 2016
Author: Okafor, W.C., Menkiti, M., Okafor, I., Ohimor, E., Onocha, O., Oreko, B., and Sheidu, S.
Hybrid Neural Network Models for Rainfall Runoffs: Comparative study
Journal: Advancement in Scientific and Engineering Research, 2013
Author: Ojugo, A. A., Abere, R., Eboka, A.O., Yerokun, M. O, Yoro, R. E., Onochie, C. C. and Oyemade, D.
Technical Properties of some plant fibres compared with glass fibre
Journal: International Journal of Engineering research in Affrica, 2014
Author: M. Sumaila, Ao. Ibhadode
A Financial Option Based Price and Risk Management Model for Pricing Electrical Energy in Nigeria
Journal: Advances in Multidisciplinary and Scientific Research Journal, 2017
Author: D. Allenotor and A.A. Ojugo
Design, production and performance testing of two component cutting force dynamometer
Journal: Journal of the Nigerian Institution of Production Engineers, 1998
Author: DAGWA, I.M. and IBHADODE, A.O.A.
Development of useful products from agro-waste and polythene bags
Journal: Conference on New Products and Technologies for Small and Medium Enterprises,, 2001
Author: IBHADODE, A.O.A
Effects of Turning Parameters on Metal Removal and Tool Wear Rates for Low Carbon Steel
Journal: Nigerian Journal of Technology (NIJOTECH), 2016
Author: Mgbemena C.O Mgbemena C.E, Etebenumeh G, and Ashiedu F. I.
DEVELOPMENT OF WATER HYACINTH BRIQUETTING MACHINE
Journal: International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), 2016
Author: Okwu O. Modestus Adeyemi I. Olabisi ThankGod E. Boye Ezurike O. Benjamin
Hydrogeological Studies for Groundwater resource and its vulnerability to contamination in Owo, Sout ...
Journal: International Journal of Science and Research (IJSR), 2015
Author: Falowo, O.O, and Imeokparia, E.G
Scale Inhibitor (SIH 307) Commissioning Using Langelier Saturation and Ryznar Stability Indices in A ...
Journal: International Journal of Engineering and Technical Research (IJETR), 2015
Author: Ohimor E.O, Oghenejobor K.M, Teddy Odisu, Iduh Donald and Onocha O.
Development and properties tests of aluminium grease for low velocity applications.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D, Isiaka, I.O and Omoleye, J.A.
Optimization of Nigerian Restaurant Waste Cooking Biodiesel Reaction Parameters using Response Surfa ...
Journal: International Journal of Energy Optimization and Engineering, 2014
Author: Waheed, M.A., Samuel, O.D., Bolaji, B.O. and Dairo, O.U.
Effect of chloride Ion in buffer medium on the liquid-liquid extraction of Cu(II) and Ni(II) using ...
Journal: International Journal of Solvent Extraction and Ion Exchange, 2005
Author: Uzokwu, B.A. and Mbonu, I. J.
Removal of Some Heavy Metals from Incinerator Bottom Ash Using Coconut (Cocos Nucifera) Husk
Journal: International Journal of Chemistry, 2016
Author: Doris F. Ogeleka, Harrison E. Avrukpere, Elias E. Elemike, Oghenekohwiroro Edjere, Iwekumo E. Agbozu
Organophosphate pesticides in herbal mixtures from Bayelsa State, Nigeria: implication for human exp ...
Journal: Journal of Environmental Exposure Assessment, 2025
Author: Tesi, G.O., Lari, B., Ogbuta, A.A., Felagha, I., Obodoka, G.C., Ogbomade, W.E., Okpara, K.E., Osioma, E. and Agbozu, I.E