PUBLICATIONS
Performance Evaluation of a Pilot Paraplegic Centricity Mobility Aid
Journal: Nigeria Journal of Technology (NIJOTECH), 2016
Author: Ashiedu F. I., Popoola E. O., and Akpan E. E.
Design of Maximum Power Point Tracker (MPPT) and Phase Locked Loop (PLL) in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, ONYAN AARON OKIEMUTE, Igbinoba Kevwe Charles
Near-surface structural model for enhanced seismic data acquisition and processing in North-Central ...
Journal: AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, 2012
Author: G. I. Alaminiokuma and J. Amonieah
Relationship between alteration rare-earth element distribution and mineralization of the Ririwai Zn ...
Journal: African Jour. Sci. and Technology, , 1990
Author: Imeokparia, E.G., and Chalokwu, C.I
Application of Electrical Resistivity Method in the Assessment of Ground Water Potentials for Sustat ...
Journal: Annals of Environmental Studies, 2016
Author: Onosemuode C, Ataikiru L. T, and Oghama E.O
Seismic Raypath and Wavefront Models in the Lithofacies of the Niger Delta, Nigeria
Journal: British Journal of Applied Science Technology, 2017
Author: G. I. Alaminiokuma
Artificial neural network model for cost optimization in a dual-source multi-destination outbound sy ...
Journal: PRODUCTION MANUFACTURING, 2018
Author: Modestus O. Okwu, Benjamin Ufuoma Oreko, Stanley Okiy, Austin C. Uzorh and Onyewuchi Oguoma
Justification for Oil Well Stimulation
Journal: The International Journal Of Engineering And Science (IJES), 2015
Author: Okotie Sylvester, Ubani C. E., Ikporo Bibobra
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
The Application of Artificial Neural Network in Prediction of the Performance of Spark Ignition Engi ...
Journal: International Journal of Engineering and Technologies, 2017
Author: O.C. Nwufo, Modestus O. Okwu, C. F. Nwaiwu, J.O. Igbokwe, E. E. Anyanwu
Emulsion Treatment in the Oil Industry: A Case Study of Oredo Field Crude Oil Emulsion
Journal: Onepetro journal , 2015
Author: Ovuema Augustina and Okotie Sylvester
The use of Remote Sensing Imageries in Monitoring Changes in Surface Water in Lake Chad Drainage Bas ...
Journal: Nigeria Journal of Tropical Geography., 2008
Author: Onosemuode C. Akhimien F. O. and Kundu J..
Effects of Reinforcement Combinations of Calcium Carbonate nanofiller on the Mechanical and Creep p ...
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2010
Author: Ihueze, C.C. Mgbemena, C.O.
Assessment of Household Energy Utilized for Cooking in Ikeja, Lagos State, Nigeria.
Journal: Nigeria Journal of Technology, NIJOTECH., 2016
Author: E. Emagbetere, J. Odia and Oreko, B.U.
2014: Heavy Metal Contamination and Distribution in Soils around Pb-Zn mines of Abakaliki district, ...
Journal: Frontiers in Geosciences, 2014
Author: Onyeobi, T.U.S. and Imeokparia, E.G.,
Computational Approach to Fracture Modelling of Polypropylene/Talc Composites.
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2012
Author: Mgbemena, C.O., Okoye, O.A.
Pareto Principle and Hazard Model as Tools for Apporpriate Scheduled Maintenance in a Manufacturing ...
Journal: African Journal of Science, Technology, Innovation and Development, 2016
Author: Johnson A. Fadeyi, Modestus O. Okwu, Chinedum O. Mgbemena, Kingsley C. Ezekiel
Laser Surface Micro/nano Patterning for Improving Aerodynamic Performance
Journal: Ph. D Thesis, 2015
Author: Otanocha, O.B
A survey of traditional foundries and forge shops and a training programme for traditional metal cra ...
Journal: Benin Journal of Educational Studies, 1999
Author: IBHADODE, A.O.A
The Use of Geoinformatics Techniques in Site Selection for solid Waste Dump A Case Study of Warri an ...
Journal: International Journal of Science and Research (IJSR), 2017
Author: Christopher Onosemuode and Omorogbe Osemwegie
IMPLEMENTATION OF A MICROCONTROLLER BASED PURE SINE WAVE INVERTER
Journal: International Journal of Scientific Engineering and Applied Science (IJSEAS), 2017
Author: GODSWILL OFUALAGBA AND CHARLES KEVWE IGBINOBA
Tool wear of some hacksaw blades
Journal: Journal of the Nigerian Institution of Production Engineers, 1994
Author: IBHADODE, A.O.A
Enhancing Hydrocarbon recovery using local Alkaline in Niger Delta Reservoir
Journal: Nigerian journal of technology (NIJOTECH), 2017
Author: Akpoturi. P .E and Ofesi S.F
Potential of Using Recycled Low-Density Polyethylene in Wood Composites Board
Journal: Tribology in Industry, Vol 33, Iss 1, Pp 11-17 (2011), 2011
Author: A. C. Igboanugo / A. O. A. Ibhadode / C. U. Atuanya
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
High Power Picosecond Laser Surface Micro-texturing of H13 Tool Steel and Pattern Replication onto A ...
Journal: Lasers in Manufacturing and Materials Processing, 2016
Author: Otanocha, O.B., Li, L., Zhong, S. and Liu, Z
Predicting Reservoir Behavior using Mathematical Models 1 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
Adjustment to Oil Saturation Estimate Due to Various Reservoir Drive Mechanisms
Journal: International Journal of Advanced Petroleum Engineering and Technology, 2014
Author: Okotie Sylvester and Ikporo Bibobra
Finite Element Analysis and Design Validation of High Pressure Gate Valve for a Typical Nigerian Oi ...
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: ThankGod E. Boye, Thaddeus C. Nwaoha and Adeyemi I. Olabisi
The Influence of Process Variables on Load and Accuracy When Forging in a Completely Closed Cavity D ...
Journal: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Institution of Mechan, 1988
Author: A O A Ibhadode MEng, PhD, T A Dean, MSc(Eng), PhD, CEng, MIMechE,
Application of Box Behnken Design for the Optimization of Steam Turbine Efficiency
Journal: World Journal of Engineering Research and Technology (WJERT), 2017
Author: Eyere Emagbetere, Ashiedu Festus Ifeanyi, and Samuel, O. D.
Hyperelastic modelling and limit stress prediction of a P195/55 R16 85H Radial tire developed from N ...
Journal: American Journal of Material Sciences and Applications., 2014
Author: Ihueze, C.C, Mgbemena, C.O.
Hydrological Analysis of Onitsha North East Drainage Basin Using Geoinformatic Techniques.
Journal: World Applied Sciences Journal , 2010
Author: Onosemuode C. Adetimirin O. I and Aboderin S. O.
Performance Evaluation of an Indigenous Rotary Power Weeder
Journal: Energy and Environmental Engineering Journal, 2012
Author: Olaoye, J. O. and Samuel, O. D. and Adekanye, T. A
Biosynthesis, Electrochemical,Antimicrobial and Antioxidant Studies of Silver Nanoparticles Mediated ...
Journal: J Clust Sci, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe,Omolola E. Fayemi, Anthony C. Ekennia, Eno E. Ebenso Louwrens R. Tiedt
Software for Reservoir Performance Prediction
Journal: Onepetrol Journal, 2015
Author: Okotie, Sylvester. and Onyekonwu Mike
Enabling a Viable Technique for the Optimization of LNG Carrier Cargo Operations
Journal: Journal of Marine Science and Application, 2016
Author: Onakoya Rasheed Alaba T. C. Nwaoha and M. O. Okwu
On the Issue of Dualism in Cartography
Journal: Anyigba Journal of Arts and Humanities, 2004
Author: Ufuah M.E, Onosemuode C
Application of genetic algorithms-determination of the optimal machining parameters in the conversio ...
Journal: INTERNATIONAL JOURNAL OF MACHINE TOOLS AND MANUFACTURE, 2004
Author: Amiolemhen, P. E. / Ibhadode, A. O.
Directional Well Trajectory Design : The Theoretical Development of Azimuth Bends and turns in compl ...
Journal: Nigerian journal of technology (NIJOTECH), 2016
Author: P.O Okpozo, Akpoturi Peters, W.C Okologume
Preliminary Study on Antimicrobial Activity of Friendly Bacteria Isolated from Dairy Products
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2015
Author: Okorhi-Damisa, F. B. and Ataikiru, T. L.
Design of DC-link Voltage Controller and Grid Current Controller in a PV-Inverter
Journal: International Journal of Engineering Research and Applications, 2012
Author: Ofualagba Godswill, Onyan Aaron Okiemute and Igbinoba Kevwe Charles
Geochemistry and Environmetric Approaches to Estimating Pollution Impacts on soils around Okaba Coa ...
Journal: Brit. Jour of Applied Science and Technology, 2014
Author: Ameh, E.G. Imasuen, I.O. and Imeokparia, E.G
Design of composite dies by the die expansion method
Journal: Technical Transactions of the Nigerian Society of Engineers, 1999
Author: IBHADODE, A.O.A
Optimizing the Output Current for a DC-DC Converter
Journal: Journal of Control Theory and Informatics, International Institute for Science, Technology and Education, 2012
Author: Ofualagba Godswill, Igbinoba Kevwe Charles and Onyan Aaron Okiemute
A Financial Option Model for Pricing Cloud Computational Resources Based on Cloud Trace Characteriza ...
Journal: IEEE African Journal of Computing ICT, 2015
Author: Allenotor, D., Oyemade, D., Ojugo, A.
Corner filling characteristics in precision forging
Journal: International Journal of Machine Tools and Manufacture , 1988
Author: A.O.A. Ibhadode,T.A.Dean
Assessment of the Social and Environmental Impacts of Keffi-Lafia Federal Highway.
Journal: International Journal of Physical Science. , 2011
Author: Onosemuode, C and Akwa, L
DEVELOPMENT OF WATER HYACINTH BRIQUETTING MACHINE
Journal: International Journal of Scientific Research in Information Systems and Engineering (IJSRISE), 2016
Author: Okwu O. Modestus Adeyemi I. Olabisi ThankGod E. Boye Ezurike O. Benjamin
DESIGN AND DEVELOPMENT OF A LOW-COST WASHING MACHINE SUITABLE FOR POLYTHENE MATERIALS
Journal: Asian Journal of Current Research, 2017
Author: EMAGBETERE EYERE, ADEYEMI I. OLABISI AND OGHENEKOWHO P. ARUOTURE1