PUBLICATIONS
Design and Development of a Paraplegic Centricity Mobility Aid
Journal: Journal of Emerging Trend in Engineering and Applied Science (JETEAS) , 2012
Author: Ashiedu Festus and Igboanugo A. C.
Integrating Remote Sensing and GIS for Environmental Management
Journal: The Built Environment Journal, 2005
Author: Ufuah M.E, and Onosemuode C
Effect of mixed Alkaline Earth Oxides in Potash Silicate Glass.
Journal: Nigerian Journal of Technology (NIJOTECH), 2015
Author: Ashiedu F. I. and Akpan E. E.
Economic Evaluation of Electrical Submersible Pump (ESP) and Gas Lift Well For Production Optimizati ...
Journal: International Journal of Engineering and Technology (IJET), 2015
Author: Ezekiel Chuks., Okotie Sylvester.and Dulu Appah
Application of Vertical Electrical Sounding to estimate aquifer characteristics of Ihiala and its en ...
Journal: ARPN Journal of Earth Sciences, , 2016
Author: 1. Obiajulu, O.O., Okpoko, E.I. Mgbemena, C.O.
Effects of Reinforcement Combinations of Calcium Carbonate nanofiller on the Mechanical and Creep p ...
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2010
Author: Ihueze, C.C. Mgbemena, C.O.
Strategies 1: Enhancing Environmenatally Conscious Engineering safety Practices in Nigeria
Journal: journal of Engineering Studies, 2005
Author: Akpoturi P.E
The Impact of 3D Printing Technology to the Nigerian Manufacturing GDP
Journal: Modern Mechanical Engineering, 2018
Author: A. Balogun, V. , B. Otanocha, O. and O. Ibhadode, A.
ENERGY- CONTENT AND SPECTRAL ANALYSES OF SHOTS FOR OPTIMUM SEISMOGRAM GENERATION IN THE NIGER DELTA
Journal: International Journal of Geology, Earth Environmental Sciences, 2014
Author: Alaminiokuma G.I. and Emudianughe J.E.
Histopathological Effects of combined doses of Copper, Chromium and Nickel on Rabbit (Oryctolagus cu ...
Journal: Tropical Journal of Environmental Science Health, 2006
Author: Tawari-Fufeyin, P, Otanocha, O. and Ugege, P.O.
Assessment of total petroleum hydrocarbons contents in water and soil samples from power station dis ...
Journal: Journal of Applied Science, 2016
Author: Edjere, O., Asibor, G. and Bassey, U.
The Effect of using mastery learning approach on academic achievement of Senior Secondary school II ...
Journal: Elixir Edu. Tech, 2012
Author: Achufusi, N.N. Mgbemena, C.O.
Investigations into the Applications of Ergonomics Principles in the Design of School Furniture in N ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences, 2013
Author: Ashiedu F. I. and Amiebenomon, S. O.
DEVELOPMENT AND IMPLEMENTATION OF DC VOLTAGE SUPPLY, VOLTAGE DIVIDER AND SAW TOOTH SIGNAL GENERATOR ...
Journal: Journal of Engineering for Development, 2013
Author: S. O. Igbinovia and A. O. ONYAN
Towards a Software Cost Reduction Model
Journal: Benin Journal of Advances in Computer Science, 2018
Author: Oyemade, D. A, Onibere, E. A.
A Classification Model Based on Machine Learning for Detecting Racist Comments on Social Media Platf ...
Journal: Journal of Behavioural Informatics, Digital Humanities and Development Research., 2021
Author: Allenotor, D. Oyemade, D. A.
Crystal structure of tetraaquabis(3,5-diamino- 4H-1,2,4-triazol-1-ium)cobalt(II) bis[bis(pyridine-2, ...
Journal: Acta Cryst, 2015
Author: Atim Johnson, Justina Mbonu, Zahid Hussain, Wan-Sin Lohe and Hoong-Kun Funf,
Advances in materials and systems technologies II
Journal: Advanced materials research, , 2009
Author: A O Ibhadode I A Igbafe B U Anyata
Predicting Reservoir Behavior using Mathematical Models 2 :Gravity Segregation of water injected int ...
Journal: International journal of Petroleum and Gas Engineering Research, 2015
Author: Nwakaudu Stanley and Akpoturi Peters
Precision die design by the die expansion method
Journal: Materials science foundations, 2009
Author: Ibhadode, A. O. Akii
Electricity Generation and Distribution in Nigeria: Technical Issues and Solutions.
Journal: International Journal of Engineering Science and Technology, 2011
Author: Chinwuko, E.C., Mgbemena, C.O., Ebhota, S.W Nwuba, E.I.U.
Investigation of plume dynamics during picosecond laser ablation of H13 steel using high-speed digit ...
Journal: Applied Physics A, 2017
Author: Krste Pangovski, Omonigho B. Otanocha, Shan Zhong, Martin Sparkes, Zhu Liu, William ONeill, Lin Li
Modelling of Multiphase Flow Metering for Crude Oil Production Monitoring
Journal: International Journal of Current Engineering and Technology, 2015
Author: Ego C. Obukohwo, Okologume C. Wilfred, Dulu Appah and Marcus B. Umeleuma
IMPLEMENTATION OF A MICROCONTROLLER BASED PURE SINE WAVE INVERTER
Journal: International Journal of Scientific Engineering and Applied Science (IJSEAS), 2017
Author: GODSWILL OFUALAGBA AND CHARLES KEVWE IGBINOBA
Advances in materials and systems technologies
Journal: Advanced materials research, 2007
Author: A O Ibhadode
Characterization of Kaolin intercalates of Oleochemicals derived from Rubber Seed (Hevea brasiliensi ...
Journal: Journal of King Saud University-Science, 2013
Author: Mgbemena, C.O., Ibekwe, N.O., Mohamed, A.P., Menon, A.R.R. Sukumar, R.
Performance Evaluation of a Pilot Paraplegic Centricity Mobility Aid
Journal: Nigeria Journal of Technology (NIJOTECH), 2016
Author: Ashiedu F. I., Popoola E. O., and Akpan E. E.
FAITH Software Life Cycle Model for Forex Expert Advisors
Journal: Journal of Advances in Mathematical and Computational Sciences, 2021
Author: Oyemade, D. A., Allenotor, D.
Phytochemical screening, antioxidant and antimicrobial activities of Acalypha ciliata plant
Journal: Clinical phytoscience, 2016
Author: Oluwakayode Odeja, Christiana Ene Ogwuche, Elias Emeka Elemike and Grace Obi
Simulation and experimental verification of completely closed cavity die forging on a mechanical pre ...
Journal: Proc. Institution of Mechanical Engineers, 1989
Author: IBHADODE, A.O.A. and DEAN, T.A
Impact of biologically treated effluent on the physico-chemical quality of a receiving stream in Ile ...
Journal: Journal of Sustainable Development, 2015
Author: Asibor, G., Edjere, O. and Adeniyi, I. F.
Optimal Reliability and Cost of Power Distribution: A case of Power Holding Company of Nigeria.
Journal: International Journal of Engineering Science and Technology, , 2011
Author: Chinwuko, E.C., Nwuba, E.I.U., Mgbemena, C.O.
A Basic Approach To Designing Embedded Systems Using a Simple Calculator and C Programming Language
Journal: Nigerian Journal of Technology, 2014
Author: F. Tanshi, N. Bello
Computational Approach to Fracture Modelling of Polypropylene/Talc Composites.
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2012
Author: Mgbemena, C.O., Okoye, O.A.
DESIGN AND DEVELOPMENT OF A LOW-COST WASHING MACHINE SUITABLE FOR POLYTHENE MATERIALS
Journal: Asian Journal of Current Research, 2017
Author: EMAGBETERE EYERE, ADEYEMI I. OLABISI AND OGHENEKOWHO P. ARUOTURE1
Sorption Trend of Crude petroleum and Petroleum Products in NIger Delta Soils
Journal: journal of Research in Engineering, 2012
Author: Akpoturi P E, Nwakaudu S and Nwogu N
Measurements and Evaluation of Anthropometric Data of Nigerian Adult Paraplegics for Wheelchair Desi ...
Journal: Journal of Emerging Trend in Engineering and Applied Sciences (JETEAS) , 2013
Author: Ashiedu, F. I. and Igboanugo A. C.
Technical Properties of some plant fibres compared with glass fibre
Journal: International Journal of Engineering research in Affrica, 2014
Author: M. Sumaila, Ao. Ibhadode
Development and Assessment of Composite Brake Pad Using Pulverized Cocoa Beans Shells Filler
Journal: International Journal of Materials Science and Applications, 2016
Author: Adeyemi Ibukun Olabisi Ademoh Nuhu. Adam Okwu Modestus Okechukwu
Antimicrobial activity and Chemical Composition of the flowers of Aspilia africana
Journal: Advances in Life Science and Technology, 2014
Author: Salit Bako, Sherah, Emmanuel Usman Onche, Idongesit Justina Mbonu, Paul Ngbede Olotu and Labumi Lajide.
Report on the Evaluation of Ugua J2 and J3 Reservoir Performance.
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: Okotie Sylvester, Ikporo Bibobra, Ovuema Augustina
Tool wear of some hacksaw blades
Journal: Journal of the Nigerian Institution of Production Engineers, 1994
Author: IBHADODE, A.O.A
An Object Selection Model for a 3D Gamming Environment
Journal: IEEE African Journal of Computing ICT, 2015
Author: Allenotor, D., Ojugo, A. Oyemade, D.
Effect of Depth of Cut, Cutting Speed and Work-piece overhang on Induced Vibration and Work Surface ...
Journal: Australian Journal of Engineering Research. , 2015
Author: C.O Izelu, Eze S.C, Oreko B.U and Edward, B.A
Bioethanol production from corn stover using Saccharomyces cerevisiae
Journal: International Journal of Scientific Engineering Research, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben and Nsidibe-Obong Ekpe Moses
Effect of Turning Parameters on Metal Removal and Tool Wear Rates of AISI 1018 Low Carbon Steel.
Journal: Nigerian Journal of Technology,, 2016
Author: Mgbemena, C.O., Mgbemena, C.E., Ashiedu, F.I. Etebenumeh, G. O.
Thermal Cycling Effects on the Fatigue Behaviour of Low Carbon Steel.
Journal: Journal of Minerals and Materials Characterization and Engineering, , 2011
Author: Mgbemena, C.O., Agbadua, S.A., Mgbemena, C.E., Chima, L.O.
Design and Development of a Manual Pump for Agrarian Communities
Journal: International Journal of Current Research , 2016
Author: Ashiedu F. I., Nwaoha T. C. and Izelu C. O.
Towards a Unified University Information System: Bridging the Gap of Data Interoperability
Journal: American Journal of Software Engineering, 2014
Author: Orobor Anderson Ise
Utilization of cellulosic cassava waste for bio-ethanol production
Journal: JECE, 2015
Author: Elias E.Elemike, Ojiefoh C.Oseghale, Anthony C.Okoye