PUBLICATIONS
Contextualization of Entrepreneurial Education in Production Engineering Discipline
Journal: Journal of Emerging Trends in Education and Policy Studies (JETERAPS) , 2011
Author: Igboanugo Anthony C. and Ashiedu Festus
Effect of Turning Parameters on Metal Removal and Tool Wear Rates of AISI 1018 Low Carbon Steel.
Journal: Nigerian Journal of Technology,, 2016
Author: Mgbemena, C.O., Mgbemena, C.E., Ashiedu, F.I. Etebenumeh, G. O.
Corrosion Rates and its Impact on Mild Steel in Some Selected Environments.
Journal: Journal of Scientific and Engineering Research., 2016
Author: Umeozokwere, A. O., Mbabuike I.U., Oreko B.U, and Ezemuo, D.T.
Preliminary Study on Antimicrobial Activity of Friendly Bacteria Isolated from Dairy Products
Journal: Issues in Biological Sciences and Pharmaceutical Research, 2015
Author: Okorhi-Damisa, F. B. and Ataikiru, T. L.
Design and Manufacture of a 30-ton Hydraulic Press
Journal: Mechanical Engineering Department, Federal University of Technology , 2011
Author: Malachy Sumaila and Akii Okon igbon Akaehomen Ibhadode
Report on the Evaluation of Ugua J2 and J3 Reservoir Performance
Journal: American Journal of Engineering and Applied Sciences, 2015
Author: 1 Okotie Sylvester, 2 Ikporo Bibobra and 3 Ovuema Augustina
Impact of biologically treated effluent on the physico-chemical quality of a receiving stream in Ile ...
Journal: Journal of Sustainable Development, 2015
Author: Asibor, G., Edjere, O. and Adeniyi, I. F.
Application of Vertical Electrical Sounding to estimate aquifer characteristics of Ihiala and its en ...
Journal: ARPN Journal of Earth Sciences, , 2016
Author: 1. Obiajulu, O.O., Okpoko, E.I. Mgbemena, C.O.
Advances in Materials and Systems Technologies III
Journal: Advanced materials research, 2012
Author: Prof. A.O. Akii Ibhadode
Carbon Nanotube: The Building Blocks of Nanotechnology Development.
Journal: J.Nanotech. Prog. Int. (JONP) , 2016
Author: Boye, E.T., Achadu, J.O, Oreko, B.U and Samuel, O.D
Performance characteristics and analysis of tailored Natural Rubber/Organo-kaolin Composites
Journal: International Journal of Plastics Technology, 2016
Author: Mgbemena, C.O., Ihueze, C.C. Menon, A.R.R.
A Validation Method of Computational Fluid Dynamics (CFD) Simulation against Experimental Data of Tr ...
Journal: American Journal of Engineering Research (AJER), 2017
Author: ThankGod E. Boye, Thaddeus C. Nwaoha Samuel D. Olusegun, Festus I. Ashiedu
Automated Student Attendance Management System Using Face Recognition
Journal: International Journal of Educational Research and Information Science, 2018
Author: Ofualagba Godswill, Omijie Osas, Orobor Anderson, Ibhadode Oseikhuemen, Odiete Etse
Performance Evaluation of an Indigenous Rotary Power Weeder
Journal: Energy and Environmental Engineering Journal, 2012
Author: Olaoye, J. O. and Samuel, O. D. and Adekanye, T. A
CARBON NANOTUBES: A REVIEW OF THE CURRENT STATE-OF-THE-ART MATERIAL SCIENCE AND TECHNOLOGY TOWARDS A ...
Journal: Int J Cur Res Rev , 2015
Author: Boye T.E., Oyekale J.O., Arivie G.O.
Phytosynthesis of silver nanoparticles using aqueous leaf extracts of Lippia citriodora: Antimicrobi ...
Journal: MSEC, 2017
Author: Elias E. Elemike, Damian C. Onwudiwe, Anthony C. Ekennia, Richard C. Ehiri, Nnaemeka J. Nnaji
Assessment of total petroleum hydrocarbons contents in water and soil samples from power station dis ...
Journal: Journal of Applied Science, 2016
Author: Edjere, O., Asibor, G. and Bassey, U.
Advances in materials and systems technologies IV : selected, peer reviewed papers from the 4th Inte ...
Journal: Advanced materials research, 2013
Author: Ibhadode, A. O. Akii / Aluyor, E.O.
Development of a Manual Metal Arc Welding Flux from Local Raw Materials in Nigeria
Journal: Applied Mechanics and Materials, 2004
Author: Oyawale Festus Adekunle, Odior Andrew Oyakhobo, Ibhadode Akii
A Simple Procedure for Calculating shut -in Tubing Pressure (SITP)
Journal: Journal of Engineering and Applied Scientific Research, 2014
Author: Akpoturi Peters
A Nonlinear Approach to Queueing System Modelling,
Journal: International Journal of Engineering Science and Technology, 2010
Author: Mgbemena, C.E., Mgbemena, C.O., Chinwuko, C.E
A Critical review of in-situ transesterification process for Biodiesel Production.
Journal: The Pacific Journal of Science and Technology, 2012
Author: Samuel, O.D. and Dairo, O.U.,
Fuzzy Based System for Power Consumption Prediction
Journal: Journal of Engineering Science and Computing, , 2017
Author: EMAGBETERE, Eyere, BOYE, E. ThankGod, OGHENEVWAIRE, S. Iyabo
High Power Picosecond Laser Surface Micro-texturing of H13 Tool Steel and Pattern Replication onto A ...
Journal: Lasers in Manufacturing and Materials Processing, 2016
Author: Otanocha, O.B., Li, L., Zhong, S. and Liu, Z
ONLINE MONITORING OF SOFT SENSOR PERFORMANCE: A CASE STUDY OF CEMENT CLINKER QUALITY PARAMETERS SOFT ...
Journal: IJRET: International Journal of Research in Engineering and Technology, 2016
Author: Nsidibe-Obong E. Moses, Sunday B. Alabi
Total Hydrocarbon Content in water and sediment samples from coastal region of Nigeria
Journal: journal ofEngineering Science and Technology, 2010
Author: Otitigbe F and Akpoturi P.E
Assessment of the Social and Environmental Impacts of Keffi-Lafia Federal Highway.
Journal: International Journal of Physical Science. , 2011
Author: Onosemuode, C and Akwa, L
Determination of Hydrocarbon Properties produced from different oil fields in Nigeria
Journal: journal of Engineering Science and Technology, 2010
Author: Otitigbe F and Akpoturi P.E
Office Noise Pollution in industrial and commercial premises in Nigeria
Journal: Nigerian journal of Industrial and Systems Studies (NJISS), 2005
Author: Akpoturi P E and J Ndukwe
Development of Asbestos-Free Friction Lining Material from Palm Kernel Shell
Journal: Journal of the Brazilian Society of Mechanical Sciences, 2008
Author: A. O. A. Ibhadode, I. M. Dagwa
Diamond Bit Selection for Horizontal Wells
Journal: journal of Engineering Research and Sustainable Development, 2009
Author: Akpoturi Peters and Onwuachi- Iheagwara P .N
Adsorption and desorption performances of Eichhornia crassipes (water hyacinth) roots and leaves pow ...
Journal: Ovidius University Annals of Chemistry, 2025
Author: Tesi, G.O., Ejeromedoghene, O., Alli, Y.A., Okunoja, H.B. and Ipeaiyeda, A.R.
An Optimized Parallel Hybrid Architecture for Cryptocurrency Mining
Journal: Computing, Information Systems, Development Informatics Allied Research Journal, 2021
Author: David Allenotor, David Ademola Oyemade
Assessment of Household Energy Utilized for Cooking in Ikeja, Lagos State, Nigeria.
Journal: Nigeria Journal of Technology, NIJOTECH., 2016
Author: E. Emagbetere, J. Odia and Oreko, B.U.
Modeling and Optimization of Hard Turning Operations on 41Cr4 Alloy Steel using Response Surface Met ...
Journal: International Journal of Mechanical Engineering and Applications (IJMEA), 2016
Author: Izelu C. O., Ezeh S. C. and Ashiedu F. I.
EFFECT OF LEMON JUICE ON THE KINECTICS OF FERMENTATION OF PALM WINE
Journal: Asian J Sci Tech, 2012
Author: A. S. Ekop, N. D. Eyop and E. E.Elemike
An Object Selection Model for a 3D Gamming Environment
Journal: IEEE African Journal of Computing ICT, 2015
Author: Allenotor, D., Ojugo, A. Oyemade, D.
2-Imino-(3,4-dimethoxybenzyl) ethanesulfonic acid Schiff base anchored silver nanocomplex mediated b ...
Journal: JART, 2016
Author: Elias E. Elemike, Enock O. Dare, Inyang D. Samuel,Jude C. Onwuka
Evaluation of Pure Aluminium Inoculated with Varying Grain Sizes of an Agro-waste based Inoculant
Journal: Advances in Science, Technology and Engineering Systems Journal , 2017
Author: 2. Adeyemi I. Olabisi, ThankGod E. Boye, Emagbetere Eyere
An investigation of the efficacy of enhanced oil recovery by means of micro-organisms in Niger Delta ...
Journal: J. Pet. Gas Explor. Res., 2014
Author: - Ikporo Bibobra. and Okotie Sylvester.
A Three Tier Learning Model for Universities in Nigeria
Journal: Journal of Technologies in Society, 2016
Author: Oyemade, D. A., Akpojaro, J., Ojugo, A., Ureigho, R. J., Imouokhome, F. A., Omoregbee, E. U.
Improved Transmission Equation for Terrestrial FSO Link
Journal: International Journal of Electrical and Electronics Research , 2016
Author: Oluwole J. Famoriji, Kazeem B. Adedeji, and Oludare Y. Ogundepo
Modified Screw Jack for Lifting Operation in Industrial Setting
Journal: International Journal of Engineering and Technologies, 2017
Author: Benjamin Ezurike, Modestus O. Okwu
Development of Asbestos-Free Automotive Brake Pad Using Ternary Agro-Waste Fillers
Journal: Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2016
Author: Adeyemi, I. Olabisi, Nuhu, A. Ademoh, Thankgod E. Boye
A Contingent Claim Approach to Bank Valuation
Journal: Journal of Mathematical Finance, 2014
Author: Enahoro Alfred Owoloko, Nicholas Amienwan Omoregbe, Michael Akindele Okedoye
Pivot Hole Thickness Optimization and Material Design for Functional Requirement of Front Axle Suppo ...
Journal: American Journal of Materials Science and Application , 2014
Author: Aduloju, S.C., Mgbemena, C.O., Maduike, J. Abdurahman, J.
The Implication of the River Niger Dredging on the Morphometric Analysis of Warri River Drainage Ba ...
Journal: Nasara Scientifique., 2005
Author: Onosemuode, Christopher
Shot Configuration Suitable for Optimizing Foldage and Offset around Areas with Non-Seismic Objects
Journal: AMERICAN JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH, 2013
Author: G. I. Alaminiokuma and D. O. Ogagarue
Empirical Model for Bioethanol Production Process from Corn Stover Using Response Surface Methodolog ...
Journal: International Journal of Emerging Trends in Engineering and Development, 2016
Author: Ohimor Evuensiri Onoghwarite, Ndirika Victor Ifeanyichukwu Obiora, Eke Akachukwu Ben
Risering of a Four-Cavity Die Production Mould by Convectional Method
Journal: Advanced Materials Research, 1994
Author: Prof. A.O. Akii Ibhadode, A.I. Igbafe and B.U. Anyata